-
EPOKSİ ÜRÜNLER
-
Floor Coatings
- PRIMER WG 032
- WALL WG 034
- BRV SC 105
- BRV SC-200 K
- PRIMER SC 210
- PRIMER SC 215
- PRIMER SC 220
- SC Z-230
- PRIMER SC 270
- PRIMER SC 325
- DECOFLOOR SC 330
- FLOOR SC 470
- SC 600
- WALL SC 605
- WALL SC 605-C
- BRV SC 610 SOLVENTSİZ EPOKSİ SON KAT BOYA-ENG
- BRV SC 620 SOLVENTSİZ TEKSTÜRLÜ EPOKSİ SON KAT BOYA-E
- BRV SC 625 SOLVENTSİZ EPOKSİ SON KAT KAYMAZ ZEMİN BOYASI-E
- FLOOR SC 645
- SC 650 ST
- FLOOR SC 902
- FLOOR SC 903
- BRV SC 905 • DÜŞEY YÜZEYLER İÇİN KİMYASAL MADDELERE DAYANIKLI SOLVENTSİZ EPOKSİ SON KAT BOYA
- FLOOR SC 950
- FLOOR SC 1200
- FLOOR AC 6380
- ROAD AC 6388
- Waterproofing Products
- Repair Anchorage and Assembly Products
- Joint Filler and Ceramic Adhesive Products
- Wood Protection Adhesive and Lamination Products
- Natural Stone Protectors
- Water Reservoir & Drainpipe Insulation Products
- Anticorrosive Products For Metal Surfaces
- Thinners
-
Floor Coatings
-
POLIURETAN PRODUCTS
- ZEMIN KAPLAMA ve BOYAMA URUNLERI
- SU YALITIM URUNLERI
- YAPISAL GUCLENDIRME TAMIR ANKRAJ MONTAJ URUNLERI
- AHSAP KORUYUCU, YAPISTIRICI ve LAMINASYON URUNLERI
- DOGALTAS KORUYUCU URUNLER
- METAL YUZEYLER ICIN ANTIKOROZIF URUNLER
- Concrete Protection and Shining Products
- TINERLER
-
AKRILIK PRODUCTS
- SU YALITIM URUNLERI
- ZEMIN KAPLAMA ve BOYAMA URUNLERI
- Indoor & Outdoor Insulation and Painting
- Fire Retardant Insulation Paint
TRAPEX SHEET ROOF AND PANEL INSULATION PAINT
DEFINITION
Uv-resistant anticorrosive, fast drying reaction, elastic, shiny, resistance to physical resistance, special protective insulation paint for high hair roofs and panels
USAGE AREAS
* Galvanized trapezez, on sheet metal roofs and roofs of buildings
* Ground, terraces and roofs where forms wet volume and where water ponds are formed on.
* On new or rusted sheet metal panels used inside and outside of buildings
* On the old sheet surfaces of the roofs..
* in sheet and galvanized water gutters of buildings
* In all kinds of Ssandblasted steel panels and trapeze
* In rusted trapeze sheets,
* Any kind of sheet surfaces that need to be protected from corrosion and oxidation />
.jpg)
.jpg)
.jpg)
Type | TS EN ISO 12944-5 | ||
Colour | Standard White,(RAL colours can be produced.) | ||
Outlook | Bright | ||
Thinner | Can be thinned with water. | ||
Application Methods | Brush, Roller, Airless Gun | ||
Solid Matter by Weight, % | 60 (White, Gray, Ral Colours) | ||
Density | 1,40± 2 gr/cm³ | ||
Waste | 0,500–0,600 kg/m2 (1 coat primer, 2nd coat top coat application) | ||
Package | 20 kg ve 5 kg in plastic bins | ||
Shelf Life | 1 year | ||
Dust Drying time | 1-2 hours/25 °C | ||
Touch Drying | 3-4 hours/25 °C | ||
Fire Reaction Class | Efl | ||
Equipment Cleaning | Water | ||
SURFACE PREPARATION
* The sheet trapezium and panels to be applied must be cleaned from oil, dirt, rust, dust and all kinds of residues.
* The application of the surface should be applied in two layers as 0,350-0,400 kg / m2 in one layer or 3 layers in a crosswise manner depending on demand..
* The application surface should be protected from rain and frost for the first 48 hours in terms of long life of the product..
REQUIREMENTS TO BE CONSIDERED ON SURFACES TO BE APPLIED
The sheet trapeze and panel must be completely cleaned of the oil residues that will prevent penetration and bonding of the paint. If there are holes formed due to corrosion on the sheet surfaces to be applied, The pierced surfaces should be closed with impregnated fiber and after drying, coat application should be started. Since rusty surfaces have better adhesion of the product, there is no problem in direct application. Applied surfaces should be protected from rain and frost for at least 48 hours. Application should not be done in the weather with rain and snow.
* Ready to use.
* Single component
* Excellent waterproof
* Practical and easy to apply
* Water-based eco-friendly
* Resistant to heat and cold
* High strength to bad weather conditions and UV resistance
* It is anticorrosive and extends the life span of applied steel and panels