-
EPOKSİ ÜRÜNLER
-
Floor Coatings
- PRIMER WG 032
- WALL WG 034
- BRV SC 105
- BRV SC-200 K
- PRIMER SC 210
- PRIMER SC 215
- PRIMER SC 220
- SC Z-230
- PRIMER SC 270
- PRIMER SC 325
- DECOFLOOR SC 330
- FLOOR SC 470
- SC 600
- WALL SC 605
- WALL SC 605-C
- BRV SC 610 SOLVENTSİZ EPOKSİ SON KAT BOYA-ENG
- BRV SC 620 SOLVENTSİZ TEKSTÜRLÜ EPOKSİ SON KAT BOYA-E
- BRV SC 625 SOLVENTSİZ EPOKSİ SON KAT KAYMAZ ZEMİN BOYASI-E
- FLOOR SC 645
- SC 650 ST
- FLOOR SC 902
- FLOOR SC 903
- BRV SC 905 • DÜŞEY YÜZEYLER İÇİN KİMYASAL MADDELERE DAYANIKLI SOLVENTSİZ EPOKSİ SON KAT BOYA
- FLOOR SC 950
- FLOOR SC 1200
- FLOOR AC 6380
- ROAD AC 6388
- Waterproofing Products
- Repair Anchorage and Assembly Products
- Joint Filler and Ceramic Adhesive Products
- Wood Protection Adhesive and Lamination Products
- Natural Stone Protectors
- Water Reservoir & Drainpipe Insulation Products
- Anticorrosive Products For Metal Surfaces
- Thinners
-
Floor Coatings
-
POLIURETAN PRODUCTS
- ZEMIN KAPLAMA ve BOYAMA URUNLERI
- SU YALITIM URUNLERI
- YAPISAL GUCLENDIRME TAMIR ANKRAJ MONTAJ URUNLERI
- AHSAP KORUYUCU, YAPISTIRICI ve LAMINASYON URUNLERI
- DOGALTAS KORUYUCU URUNLER
- METAL YUZEYLER ICIN ANTIKOROZIF URUNLER
- Concrete Protection and Shining Products
- TINERLER
-
AKRILIK PRODUCTS
- SU YALITIM URUNLERI
- ZEMIN KAPLAMA ve BOYAMA URUNLERI
- Indoor & Outdoor Insulation and Painting
- Fire Retardant Insulation Paint
FLOOR PU 150
DEFINITION
USAGE AREAS
It is used as elastic polyurethane floor covering at hospitals, schools, offices, sports halls, shopping centers, hotels, storage areas, cold storage, in food production facilities and in all industrial areas where hygiene is required. It has high mechanical and chemical resistance, high tensile and tear strength and it is solvent free.
| Type | TS EN 1504-2/ April 2008 Principle 5(PR): 5.1 Physical Resistance / Surface Improvement Coating Application C |
| Colour | RAL colours |
| Outlook | Semi Bright There may be discoloration in environments exposed to direct sunlight, but it does not negatively affect the performance of the product. |
Solid Matter by Weight, % | 100 |
Density | 1,30 g/cm³ |
Waste | 0,800 – 1,600 kg / m2 |
| Package | 16 kg Component A + 4 kg Component B:Total 20 kg |
Flash Point | >25 °C |
Mixture Ratio | 4 / 1 |
Application Methods | Brush, Roller, Trowel |
Mixture Life | 30 minutes / 25 °C |
Shelf Life | 1 year |
Waiting Time Between Coats | 8 hours/25 °C |
Drying Time | 8 hours/25 °C |
Mechanical Strength | 7 days |
Shore D Hardness (7 days / 25°C) | 45 |
Equipment Cleaning | Polyurethane Thinner |
* Prior to applying the primer coat, the surfaces to be applied must be free from oil, dust, and dirty.
* Free parts on the surface, cement grout on concrete surfaces and parts that prevent adhesion must be cleaned.
MIXING PREPARATION
A and B component should be mixed with a low speed mixer for at least 3-4 minutes until a homogenous mixture is obtained by paying attention to mixture ratios. It is ready for application after mixing.
COATING SYSTEM
If it is 24 hours past the priming process after the floor is roughened with sandpaper, PU 145 polyurethane self leveling coating application should be started. Product spread the ground with the help of gear trowel and the coating should be aired with a spiked roller when appropriate consistency is achieved to obtain the desired thickness on the surface of the ground. It is recommended to apply 0,150-0,200 kg/m² PU 130 Polyurethane Mat Protective Paint or PU 135 Polyurethane Gloss Protective Paint where high UV resistance is desired.