-
EPOKSİ ÜRÜNLER
-
Floor Coatings
- PRIMER WG 032
- WALL WG 034
- BRV SC 105
- BRV SC-200 K
- PRIMER SC 210
- PRIMER SC 215
- PRIMER SC 220
- SC Z-230
- PRIMER SC 270
- PRIMER SC 325
- DECOFLOOR SC 330
- FLOOR SC 470
- SC 600
- WALL SC 605
- WALL SC 605-C
- BRV SC 610 SOLVENTSİZ EPOKSİ SON KAT BOYA-ENG
- BRV SC 620 SOLVENTSİZ TEKSTÜRLÜ EPOKSİ SON KAT BOYA-E
- BRV SC 625 SOLVENTSİZ EPOKSİ SON KAT KAYMAZ ZEMİN BOYASI-E
- FLOOR SC 645
- SC 650 ST
- FLOOR SC 902
- FLOOR SC 903
- BRV SC 905 • DÜŞEY YÜZEYLER İÇİN KİMYASAL MADDELERE DAYANIKLI SOLVENTSİZ EPOKSİ SON KAT BOYA
- FLOOR SC 950
- FLOOR SC 1200
- FLOOR AC 6380
- ROAD AC 6388
- Waterproofing Products
- Repair Anchorage and Assembly Products
- Joint Filler and Ceramic Adhesive Products
- Wood Protection Adhesive and Lamination Products
- Natural Stone Protectors
- Water Reservoir & Drainpipe Insulation Products
- Anticorrosive Products For Metal Surfaces
- Thinners
-
Floor Coatings
-
POLIURETAN PRODUCTS
- ZEMIN KAPLAMA ve BOYAMA URUNLERI
- SU YALITIM URUNLERI
- YAPISAL GUCLENDIRME TAMIR ANKRAJ MONTAJ URUNLERI
- AHSAP KORUYUCU, YAPISTIRICI ve LAMINASYON URUNLERI
- DOGALTAS KORUYUCU URUNLER
- METAL YUZEYLER ICIN ANTIKOROZIF URUNLER
- Concrete Protection and Shining Products
- TINERLER
-
AKRILIK PRODUCTS
- SU YALITIM URUNLERI
- ZEMIN KAPLAMA ve BOYAMA URUNLERI
- Indoor & Outdoor Insulation and Painting
- Fire Retardant Insulation Paint
METAC PU 123
DEFINITION
Two component acrylic polyurethane topcoat paint with low solvent content.
USAGE AREAS
It is used as a topcoat anticorrosive paint on all kinds of metal surfaces which are primed in petrochemical plants, refineries and port facilities, fuel depots, power plants, pipelines, industrial vehicles, cranes, wagons and containers where UV resistance is required.
Type | TS EN ISO 12944-5 |
Colour | Ral colours |
Outlook | Semi Matt |
Thinner | Polyurethane Thinner |
Solid Matter by Weight, % | 70 |
Density | 1,30 g/cm³ |
Waste | For 40 micron at single coat 70 gr / m2 |
Package | 18 kg A Component + 2 kg B Component: Total 20 kg |
Flash Point | >25 °C |
Mixture Ratio | 9/1 |
Application Methods | Brush, Roller, Air Gun, Airless Gun |
Mixture Life | 1 hours/25 °C |
Shelf Life | 1 year |
Waiting Time Between Coats | 4 hours/25 °C |
Drying Time | 4 hours/25 °C |
Mechanical Strenght | 7 days |
Equipment Cleaning | Polyurethane Thinner |
SURFACE PREPARATION
Before applying the primer coat, the free particles, paint residues, oil, dirt and dust on the surface must be thoroughly cleaned, brokens and cracks must be repaired and the surface must be absolutely roughened before application.
MIXING PREPARATION
A and B component should be mixed with a low speed mixer for at least 3-4 minutes until a homogenous mixture is obtained by paying attention to mixture ratios. It is ready for application after mixing.
APPLICATION CONDITIONS
* Application should not be applied if the ambient and surface temperature is below +10 ºC or above +30 ºC.
* Avoid application in rainy and windy weather.
* It must be protected against water for at least 24 hours after painting is completed.
* Relative humidity must not exceed 70% when applied.
Products that can be used under this product:
* AC 2480 Epoxy Intermediate Primer
* AC 070 Epoxy Zinc Rich Prime
* AC 080 Surface Tolerant Epoxy Primer