GLOSS PU 128

POLIURETHAN BRIGHT TOP COAT PAINT

DEFINITION

Two component, acrylic polyurethane bright top coat paint.

USAGE AREAS

It is used on metal and wooden surfaces where UV resistance is required.Brightness and abrasion resistance are high. It can also be used as bathtub paint.

Type	TS EN ISO12944-4
Colour	Ral colours
Outlook	Bright
Thinner	Polyurethane Thinner
Solid Matter by Weight, %	65
Density	1,20 g/cm³
Waste	For 40 micron at single layer 70 gr / m2²
Package	20 kg A Component + 5 kg B Component :Total 25 kg
Flash Point	>25 °C
Mixture Ratio	4 / 1
Application Methods	Fırça, Rulo, Havalı Tabanca
Mixture Life	60 dakika/25 °C
Shelf Life	1 years
Waiting Time Between Coats	2 hours/25 °C
Drying Time	12 hours/25 °C
Mechanical Strenght	7 days
Equipment Cleaning	Polyurethane Thinner

SURFACE PREPARATION

Before applying the primer coat, the free particles, paint residues, oil, dirt and dust on the surface must be thoroughly cleaned, brokens and cracks must be repaired and the surface must be absolutely roughened before application.

MIXING PREPARATION

A and B component should be mixed with a low speed mixer for at least 3-4 minutes until a homogenous mixture is obtained by paying attention to mixture ratios. It is ready for application after mixing.

APPLICATION CONDITIONS

* The surfaces must be free from oil and dirty * Avoid application in very humid environments and below 10°C. * Mixing ratios should be considered. * Relative humidity must not exceed 70% when applied.

GLOSS PU 128

DEFINITION

PRODUCTS GROUPS

CONTACT US