-
EPOKSİ ÜRÜNLER
-
Floor Coatings
- PRIMER WG 032
- WALL WG 034
- BRV SC 105
- BRV SC-200 K
- PRIMER SC 210
- PRIMER SC 215
- PRIMER SC 220
- SC Z-230
- PRIMER SC 270
- PRIMER SC 325
- DECOFLOOR SC 330
- FLOOR SC 470
- SC 600
- WALL SC 605
- WALL SC 605-C
- BRV SC 610 SOLVENTSİZ EPOKSİ SON KAT BOYA-ENG
- BRV SC 620 SOLVENTSİZ TEKSTÜRLÜ EPOKSİ SON KAT BOYA-E
- BRV SC 625 SOLVENTSİZ EPOKSİ SON KAT KAYMAZ ZEMİN BOYASI-E
- FLOOR SC 645
- SC 650 ST
- FLOOR SC 902
- FLOOR SC 903
- BRV SC 905 • DÜŞEY YÜZEYLER İÇİN KİMYASAL MADDELERE DAYANIKLI SOLVENTSİZ EPOKSİ SON KAT BOYA
- FLOOR SC 950
- FLOOR SC 1200
- FLOOR AC 6380
- ROAD AC 6388
- Waterproofing Products
- Repair Anchorage and Assembly Products
- Joint Filler and Ceramic Adhesive Products
- Wood Protection Adhesive and Lamination Products
- Natural Stone Protectors
- Water Reservoir & Drainpipe Insulation Products
- Anticorrosive Products For Metal Surfaces
- Thinners
-
Floor Coatings
-
POLIURETAN PRODUCTS
- ZEMIN KAPLAMA ve BOYAMA URUNLERI
- SU YALITIM URUNLERI
- YAPISAL GUCLENDIRME TAMIR ANKRAJ MONTAJ URUNLERI
- AHSAP KORUYUCU, YAPISTIRICI ve LAMINASYON URUNLERI
- DOGALTAS KORUYUCU URUNLER
- METAL YUZEYLER ICIN ANTIKOROZIF URUNLER
- Concrete Protection and Shining Products
- TINERLER
-
AKRILIK PRODUCTS
- SU YALITIM URUNLERI
- ZEMIN KAPLAMA ve BOYAMA URUNLERI
- Indoor & Outdoor Insulation and Painting
- Fire Retardant Insulation Paint
PRIMER SC 220
DEFINITION
Two component, solvent-free epoxy primer for 100% moist and wet surfaces that penetrates into the capillary cracks and forms the humid barrier
Public Works Pos. No: 04.379/H02
USAGE AREAS
Used as wet surface concrete primer before application of epoxy, polyurethane and polyurea. factory and warehouse floors, working areas, loading zones, industrial floors exposed to medium and heavy loads
Type |
|
Colour | Colorless |
Outlook | Blurred |
Solid Matter by Weight, % | 98 |
Density | 1,20 g/cm³ |
Waste | 0,300-0,500 kg / m2 |
Package | 12 kg A Component + 5 kg B Component : Total 17 kg |
Flash Point | >25 °C |
Mixture Ratio | 2,4 / 1 |
Application Methods | Brush, Roller, Trowell |
Mixture Life | 40 min / 25°C |
Shelf Life | 1 year |
Waiting Time Between Coats | 12 hours / 25°C |
Drying Time | 12 hours / 25°C |
Mechanical Strength | 7 days |
Equipment Cleaning | Epoxy Thinner |
SURFACE PREPARATION
Free particles and paint residues on the surface must be thoroughly cleaned, brokens and cracks must be repaired, surfaces should be roughened mechanically (blastrack or milling router) and cleaned from vacuum with vacuum cleaner.
MIXING PREPARATION
A and B component should be mixed with a low speed mixer for at least 3-4 minutes until a homogenous mixture is obtained by paying attention to mixture ratios. It is ready for application after mixing.
APPLICATION CONDITIONS
* Surface should have sufficient strength. The concrete should have a compressive strength of at least 25 N/mm² and a tensile strength of at least 1,5 N/mm²..
* The SC 220 Epoxy Prime for 100% Humid Surfaces should be completed its curing before the top coat coating is started.
* Avoid application below 5°C.
* Mixing ratios should be considered.
Products that can be used upper this product :
- SC 650 ST Solvent Free Epoxy Resin Based Top Coat Coating
- SC 605 Epoxy Top Coat Paint for Vertical Surfaces
- SC 645 Orange Coat Patterned Top Coat Epoxy Coating
- SC 800 Hygienic Epoxy Top Coat Coating and Paint for Potable Water Reservoir
- SC 902 Solvent Free Epoxy Top Coat Coating.
- SC 905 Solvent Free Epoxy Paint Resistant to Chemical Matter for Vertical Surfaces
- SC 950 Solvent Free Epoxy Coating Resistant to Chemical Matter
- PU 145 Polyurethane Self Leveling Coating
- PU 150 Polyurethane Semi-Elastic Self Leveling Coating
- PU 160 Polyurethane Elastic Water Isolation Membrane
- PU 170 Polyurethane Water Isolation Membrane