-
EPOKSİ ÜRÜNLER
-
Floor Coatings
- PRIMER WG 032
- WALL WG 034
- BRV SC 105
- BRV SC-200 K
- PRIMER SC 210
- PRIMER SC 215
- PRIMER SC 220
- SC Z-230
- PRIMER SC 270
- PRIMER SC 325
- DECOFLOOR SC 330
- FLOOR SC 470
- SC 600
- WALL SC 605
- WALL SC 605-C
- BRV SC 610 SOLVENTSİZ EPOKSİ SON KAT BOYA-ENG
- BRV SC 620 SOLVENTSİZ TEKSTÜRLÜ EPOKSİ SON KAT BOYA-E
- BRV SC 625 SOLVENTSİZ EPOKSİ SON KAT KAYMAZ ZEMİN BOYASI-E
- FLOOR SC 645
- SC 650 ST
- FLOOR SC 902
- FLOOR SC 903
- BRV SC 905 • DÜŞEY YÜZEYLER İÇİN KİMYASAL MADDELERE DAYANIKLI SOLVENTSİZ EPOKSİ SON KAT BOYA
- FLOOR SC 950
- FLOOR SC 1200
- FLOOR AC 6380
- ROAD AC 6388
- Waterproofing Products
- Repair Anchorage and Assembly Products
- Joint Filler and Ceramic Adhesive Products
- Wood Protection Adhesive and Lamination Products
- Natural Stone Protectors
- Water Reservoir & Drainpipe Insulation Products
- Anticorrosive Products For Metal Surfaces
- Thinners
-
Floor Coatings
-
POLIURETAN PRODUCTS
- ZEMIN KAPLAMA ve BOYAMA URUNLERI
- SU YALITIM URUNLERI
- YAPISAL GUCLENDIRME TAMIR ANKRAJ MONTAJ URUNLERI
- AHSAP KORUYUCU, YAPISTIRICI ve LAMINASYON URUNLERI
- DOGALTAS KORUYUCU URUNLER
- METAL YUZEYLER ICIN ANTIKOROZIF URUNLER
- Concrete Protection and Shining Products
- TINERLER
-
AKRILIK PRODUCTS
- SU YALITIM URUNLERI
- ZEMIN KAPLAMA ve BOYAMA URUNLERI
- Indoor & Outdoor Insulation and Painting
- Fire Retardant Insulation Paint
SEAL TK 055
DEFINITION
Silane siloxane modified solvented, transparent acrylic polyurethane concrete and natural stone preservative with single component, high penetration
Public Works Pos. No: 04.559/02
USAGE AREAS
All kinds of concrete and mineral surfaces, mosaic surfaces, natural stones (marble, travertine, slate, granite, synthetic and natural stone flooring,)
.jpg)
.jpg)
Type |
TS EN 1504-2/ April 2008 Principle 5 (PR): 5.1 Physical Resistance / Surface Improvement Coating Application (C) |
Colour | Transparent |
Outlook | Bright |
Thinner | Ready to use If necessary it can be thinned with polyurethane thinner. |
Density | 0,95 gr/cm³ |
Waste | Between 50gr–200 gr/m² at single coat depending on the roughness and suction condition of the application surface. |
Package | 4 kg, 15 kg in tin cans |
Application Methods | brush, roller, air or airless gun (11-13 nozul meme ucu) |
Application Temperature | +5 C - + 30 C |
Shelf Life | 1 year |
Drying Time | Full drying 24 hours |
Equipment Cleaning | Polyurethan Thinner |
SURFACE PREPARATION
The surfaces to be applied must be free from oil, dust, rust, dirty and all kind of residues.
APPLICATION CONDITIONS
* The product is ready for use.
* It is applied at least two coats on high suction, textured and rough surfaces.
* The application is made by roller and the soft bristle brushing over allows the product to be homogeneously distributed on the surface. It should be applied with a break of at least 1 hour between both coats.
* The full performance of the product must be tested at least 24 hours later..
* Good ventilation should be provided in applications to be performed in confined spaces.
* No smoking during application and solvent vapors should not be inhaled
* Easy to apply,
* Has high penetration ability.
* Resistant to UV rays.
* Waterproof
* Protector against alkaline and acidic stain forming products (Tea, coffee, ketchup, mayonnaise, coke, etc)
* Prevents surface wears because it forms a hard and durable surfac.
* Creates a decorative and aesthetic appearance on the surfaces.
* Creates slightly wet appeaarance on the applied surface.