E-KATALOGLAR
RAL K7 Classic
Teknik Şartnameler
MAKİNA PARKURUMUZ
E-KATALOGLAR
RAL K7 Classic
Teknik Şartnameler
MAKİNA PARKURUMUZ

POWERMIX PW

DEFINITION

Ready-to-use, high-strength, mineral-filled, fluid-viscosity acrylic mortar and waterproofing coating with specific chemical and physical properties.

USAGE AREAS

It is used on the terraces and roofs of the buildings, in the floor terraces and roofs forming a wet volume and water ponding, on concrete, plaster, wood, osb, mdf, gas concrete, betopan and other mineral surface elements, in basic curtain concrete, inside and outside of the buildings, on insulated surfaces at old buildings with problem, on concrete surfaces and stone surfaces.

 

Type

TS EN 1504-2/ April 2008 Principle 2 (MC): Humid control: 2.2 Coating application (C) ,

Colour

White, Gray (RAL colors can be produced on request)

Outlook

Matt

Thinner

Can be thinned with water.

Solid Matter by Weight, %

75

Density

1,50 g/cm³

Waste

0,800 – 1,000 kg / m2

Package

20 kg

Application Methods

Brush, Roller, Airless Gun

Shelf Life

1 year

Dust Drying Time

1-2 hours /25 °C

Touch Drying

3-4 hours/25 °C

Equipment Cleaning

Clean with water.

SURFACE PREPARATION

* The soil to be applied must be cleaned from oil, dirt, rust, dust and all kinds of residues.

* Durableness and endurance of soil, cleaning from dust residues affects product performance positively

APPLICATION CONDITIONS

Polimero Primer should be used as a primer coat before the application of Powermix PW. Application can be made with a drawer, roller, trowel or airless gun. Before use, mix with a mixer in its bucket for 2-3 minutes. If the application is carried out with more than one coat, after application of the first coat, wait 12 hours at 25 ° C and apply another coat. After application, the floor must be protected from adverse weather conditions such as rain, hail, snow, etc. for 48 hours. It is recommended to apply to the surface POLIMERO PU MS 1K Flexible waterproofing coating as single or double coat on request. POLİMERO PU MS 1K Flexible waterproofing coating can also be used as a primer with 20% dilution.