FLOOR PU 135

DEFINITION

Two component, acrylic polyurethane protective bright paint .

USAGE AREAS

It is used as top coat protective bright paint in epoxy and polyurethane coating systems desired UV resistance.

Type	TS EN 1504-2/ April 2008 Principle 5(PR): 5.1 Physical Resistance / Surface Improvement Coating Application C
Colour	RAL colours
Outlook	Parlak
Thinner	Polyurethane Thinner
Solid Matter by Weight, %	70
Density	1,20 g/cm³
Waste	50-100 gr / m²
Package	20 kg A Component + 5 Kg B Component: Total 25 kg
Flash Point	>25 °C
Mixture Ratio	4/1
Application Methods	Brush, Roller, Air Gun, Airless Gun
Mixture Life	1 hour / 25°C
Shelf Life	1 yıl
Waiting Time Between Coats	2 hours /25°C
Drying Time	12 hour s/25 °C
Mechanical Strength	7 days
Equipment Cleaning	Polyurethane Thinner

SURFACE PREPARATION
The surfaces to be applied must be free from oil, dust, and dirty.

MIXING PREPARATION
A and B component should be mixed with a low speed mixer for at least 3-4 minutes until a homogenous mixture is obtained by paying attention to mixture ratios. It is ready for application after mixing.

APPLICATION CONDITIONS

* Application should not be applied if the ambient and surface temperature is below +10 ºC or above +30 ºC.

* Avoid application in rainy and windy weather.

* It must be protected against water for at least 24 hours after painting is completed.

* Relative humidity must not exceed 70% when applied.

Products that can be used under this product:

* SC 650 ST Solvent Free Epoxy Resin Based Top Coat Coating

* PU 145 Polyurethane Self Leveling Coating

* PU 150 Polyurethane Self Leveling Semi Elastic Coating

FLOOR PU 135

DEFINITION

USAGE AREAS

PRODUCTS GROUPS

CONTACT US