BRV SC 315

DEFINITION

Two component, solvent free epoxy repair, anchorage and assembly mortar.

Public Works Pos. No: 04.379/H05

USAGE AREAS

It is used In the repair, installation and isolation of cracks, in fixing The anchoring elements, bonding of dilatation tapes of Ceramic, metal, steel, concrete components, in sowing sprout, in all areas requiring structural strengthening before carbon and aramid fiber lamination.

Type	TS EN 1504-6
Colour	Gray
Outlook	Matt
Solid Matter by Weight, %	99
Density	1,80 g/cm³
Package	4,50 kg A Component + 1,50 kg B Component = Total 6 kg
Mixture Ratio	3 / 1
Application Methods	Craper, Trowell
Mixture Life	50 min/ 25°C
Shelf Life	1 year
Waiting Time Between Coats	12 hours / 25°C
Drying Time Bending Strength Elasticity Module Adhesion Strength (Steel) (Breaking from concrete) Pressure Strength	12 hours / 25°C At 20°C min. 30-40 N/mm2 (10 Days) 4´300 N/mm² 15 N/mm2 (10 Days) 4 N/mm2 (10 Days) At 20°C min.60-70 N/mm2 (10 Days)

SURFACE PREPARATION

Free particles and paint residues on the surface must be thoroughly cleaned, brokens and cracks must be repaired, surfaces should be roughened and cleaned from vacuum with vacuum cleaner.

MIXING PREPARATION

A and B component should be mixed with a low speed mixer for at least 3-4 minutes until a homogenous mixture is obtained by paying attention to mixture ratios. It is ready for application after mixing.

APPLICATION CONDITIONS

* Avoid application in very humid environments and below 5°C.

* Mixing ratios should be considered.

* Solvent free

* Easy to use

* Use on vertical surfaces without sagging

* Excellent adhesion to metal, steel and concrete.

* Chemical resistance.

* Mechanical strength.

* Provides strong adherence between metal and concrete.

*During the sowing sprout, it is easily wrapped to iron and provides anticorrosive protection.

BRV SC 315

DEFINITION

USAGE AREAS

PRODUCTS GROUPS

CONTACT US