E-KATALOGLAR
RAL K7 Classic
Teknik Şartnameler
MAKİNA PARKURUMUZ
E-KATALOGLAR
RAL K7 Classic
Teknik Şartnameler
MAKİNA PARKURUMUZ

SUPER CONCRETE NATRIUM GUARD

DEFINITION

Sodium silicate is a surface thickener and hardener to obtain a shiny appearance on the surface, to increase the physical strength of the concrete surface on all concrete surfaces, to prevent dusting

Public Works Pos.No: 04.379/F01

USAGE AREAS

New or old concrete surfaces, cement based mineral surfaces, storage areas, factories, factories, multi-storey car parks, airplane hangars, work place buildings, cold storage warehouses, food industry factories, pharmacy stores, laboratories and all enterprises with concrete floors


Colour

Transparent

Outlook

Bright

Thinner

Ready to use

Solid Matter by Weight, %

27 ± 2

Dnensity

Surface penetration

1,20 gr/cm3

2- 8 mm

Waste

Between 100 gr – 250 gr/m2 at single coat depending on the roughness and suction condition of the application surface.

Package

5, 10, 20 kg in plastic bins

Application Methods

brush, roller, air or airless gun

Application Temperature

It must be applied between +5 +40 ºC.

Shelf Life

1 year

Drying Time

2nd coat application time

1-2 hours /25 °C

Without leaving the product when the first coat is completely dry after 4 - 5 hours

Equipment Cleaning

Water

SURFACE PREPARATION

The surfaces to be applied must be free from oil, dust, rust, dirty and all kind of residues. Acid-containing cleaners should not use as they will degrade the surface properties of the concrete floor to be applied.

APPLICATION

The product is applied to the surface to be applied by low pressure machine or by means of soft pile brush. The surface is kept wet for at least 30 minutes and during this time, the product is thoroughly rubbed with a soft brush. After application, the gelled product on surface is watered and removed with a rubber tipped scrubber or water-based machine so that no residue remains on the surface. After the surface has dried, no residue should remain on the surface. For extra shine it can be polished with special pads with surface wiping machine.

* Easy to apply,

* High penetration ability (2-8 mm from surface)

* Water based.

* Nano Technological structure and containing sodium silicate.

* Maximum dust tolerance on concrete surfaces

* Shiny and mechanical strength creates a high concrete surface.

* Prevents salt vomit, flowering and staining.

* It would be a very good penetrating into concrete it reacts with the lime in the concrete structure and forms a bond which is insoluble in the concrete.

* Can be used as curing material in freshly spilled concrete.

* Allows the concrete surface to breathe.

* Maintenance and cleaning is easy.

* Extends the life of concrete.

*No harm to the environment and human health due to low VOC content.

PRODUCTS GROUPS

 

CONTACT US