APPLICATION SUGGESTIONS

* Applicable Soil Temperature +5°C - + 30°C

* Application Time Between 3 hours / 25°C

thick applications should be avoided at once because it will adversely affect the drying time and performance of product.

SURFACE PREPARATION

UThe floor to be applied must be cleaned from oil, dirt, rust, dust and all kinds of residues. Durablenes and endurance of soil and cleaning of dust residues affects the performance of the product positively.
The product should be diluted with 20% water at 1st coat primer application and it should be applied in a thin layer of 0,150 - 200 kg / m2 amount that the surface can absorbe. The subsequent floors should be applied as to cross each other for the 1st coat 0,400 kg/m² for 2nd coat 0,400 kg/m² in total 0,800 kg/m² without diluting with water. The surface of the application must be protected from rain and frost for the first 48 hours in terms of the product's longevity.m² ince bir tabaka halinde uygulanmalıdır. Daha sonraki katlar ürün su ile seyreltilmeden 1. Kat 0,400 kg/m² 2. Kat 0,400 kg/m²   Toplam 0,800 kg/m² birbirine çapraz olacak şekilde uygulanmalıdır. Uygulama yüzeyi ürünün uzun ömürlü olması açısından ilk 48 saat yağmur ve dondan korunmalıdır. 

REQUIREMENTS TO BE CONSIDERED ON SURFACES PRODUCT APPLIED

Surfaces such as glass, ceramics and glazed ceramics without water emulsion should be roughened before application. (Joints of surfaces with joint spacing should be cleaned with a wire brush and the residues should be removed from the surface.)
No surface smoothing is required on normal calendered concrete surfaces that no surface hardener used. Oil, dirt and the residues and formations that willprevent the surface emulsion must be completely removed on all other surfaces.
The surface must be roughened again on concrete surfaces, in areas where surface hardener, cure agent products and paraffin derivatives used. Polymer applied surfaces should be protected from exposure to physical and chemical effects for 3 days.