-
EPOXY PRODUCTS
-
Floor Coatings
- PRIMER WG 032
- WALL WG 034
- BRV SC 105
- BRV SC-200 K
- PRIMER SC 210
- PRIMER SC 215
- PRIMER SC 220
- SC Z-230 Self Leveling C Komponent
- PRIMER SC 270
- PRIMER SC 325
- DECOFLOOR SC 330
- FLOOR SC 470
- SC 600
- WALL SC 605
- WALL SC 605-C
- BRV SC 610 • Solvent-Free Epoxy Topcoat
- BRV SC 620 • Solvent-Free Textured Epoxy Topcoat
- BRV SC 625 SOLVENT-FREE EPOXY TOP COAT NON-SLIP FLOOR PAINT
- FLOOR SC 645
- SC 650 ST
- FLOOR SC 902
- FLOOR SC 903
- BRV SC 905 • CHEMICAL RESISTANT SOLVENT-FREE EPOXY TOP COAT FOR VERTICAL SURFACES
- FLOOR SC 950
- FLOOR SC 1200
- FLOOR AC 6380
- ROAD AC 6388
- Waterproofing Products
- Repair Anchorage and Assembly Products
- Joint Filler and Ceramic Adhesive Products
- Wood Protection Adhesive and Lamination Products
- Natural Stone Protectors
- Water Reservoir & Drainpipe Insulation Products
- Anticorrosive Products For Metal Surfaces
- Thinners
-
Floor Coatings
-
POLYURETHANE PRODUCTS
- FLOOR COVERING AND PAINTING PRODUCTS
- WATERPROOFING PRODUCTS
- STRUCTURAL REINFORCEMENT REPAIR ANCHOR INSTALLATION PRODUCTS
- WOOD PROTECTOR, ADHESIVE AND LAMINATION PRODUCTS
- NATURAL STONE PROTECTIVE PRODUCTS
- ANTICORROSIVE PRODUCTS FOR METAL SURFACES
- CONCRETE SURFACE PROTECTION AND POLISHING PRODUCTS
- THINNERS
-
ACRYLIC PRODUCTS
- WATERPROOFING PRODUCTS
- FLOORING AND PAINTING PRODUCTS
- INTERIOR AND EXTERIOR INSULATION & PAINT PRODUCTS
- SPECIAL FLAME RETARDANT INSULATION PRODUCTS
SHINGL GUARD
DEFINITION
It is a protective insulation coating for slated shinglings and bituminous membranes with specific chemical and physical properties, high strengtHdır.
USAGE AREAS
It is used to protect the old or new slated shinglings and bituminous membranes and bituminous surfaces used in the terraces and roofs of the buildings from adverse weather conditions, sun damaging rays and strength for a longer period of time.
Type | TS EN 1062-1 |
Colour | White, Tile Red, Membrane Green, (optionally RAL colors) |
Outlook | Matt |
Thinner | Can be thinned with water. |
Solid Matter by Weight, % | 75 |
Density | 1,50 g/cm³ |
Waste | 0,400–0,600 kg/m2 |
Package | 5 kg - 20 kg in plastic bins |
Application Methods | brush, roller, airless gun |
Shelf Life | 1 year |
Dust Drying Time | 1-2 hours /25 °C |
Touch Drying | 3-4 hours/25 °C |
Equipment Cleaning | With water. |
SURFACE PREPARATION
The surfaces to be applied must be free from oil, dust, rust, dirty and all kind of residues. The floor is strong and durable, washing and cleaning the dust residue affects the performance of the product positively
APPLICATION CONDITIONS
ŞinPrior to the application of Shingle Guard, Poly Primer should be used as primer coat. Application can be done with roller, brush or airless gun.. Before use, mix with a mixer in its bucket for 2-3 minutes. If application is to be done with more than one coat, after first coat application, 12 hours at 25 ° C should be waited and the other coat should be applied. After application, over the shingles membranes must be protected for 48 hours under adverse weather conditions such as rain, hail, snow.
* It ensures that slated shinglings and bituminous membranes are prevented its degradation resulting in carbonization by affecting by the sun's harmful UV rays and adverse weather conditions.
* Provides excellent water-repellent properties so that they are not affected by water.
* Thanks to its mineral fillings, it provides high abrasion resistance and resistance to bad weather conditions. It does not tear on the surface it is applied in the wind and storm.
* It does not fade and rewind over time thanks to special pigments resistant to UV rays used in the product content.
* Shinglings enable membranes to have more vibrant and bright decorative appearance