FLEX PU 076

DEFINITION

Two component, solvent free, thixotropic polyurethane adhesive

USAGE AREAS

It is used for gluing gypsum and betopan panels, styrofoam, plate, osb, wood, chipboard, rubber and stone.

PRODUCT SPECIFICATIONS Type	TS EN 12004 (system3)
Colour	Beige
Solid Matter by Weight, %	100
Densit	1,65 g/cm³
Package	8 kg A Component + 1 kg B Component: Total 9 kg
Flash Point	>105 °C
Mixture Ratio	8 / 1
Mixture Life	30 minutes/25°C
Shelf Life	1 year
Waiting Time Between Coats	12 hours/ 25°C
Drying Time	12 hours/ 25°C
Mechanical Strength	7 days
Equipment Cleaning	Polyurethane Thinner

SURFACE PREPARATION

* The surfaces to be applied should be free from oil, dust and dirty.

* Free parts on the surface and parts that prevent adhesion should be cleaned.

* The surface should be roughened where necessary.

MIXING PREPARATION

A and B component should be mixed with a low speed mixer for at least 3-4 minutes until a homogenous mixture is obtained by paying attention to mixture ratios. It is ready for application after mixing.

APPLICATION CONDITIONS

* The surfaces should have sufficient strength.

* The surface must be clean and dry.

* Avoid application very humid conditions and below 10°C.

* Mixing ratios should be considered..

* Relative humidity must not exceed 70% when applied.

FLEX PU 076

DEFINITION

USAGE AREAS

PRODUCTS GROUPS

CONTACT US