PROTECT AC 875

DEFINITION

Two component ,solvented epoxy mat lacquer.

USAGE AREAS

It is used on wood, concrete, natural stone, and metal surfaces.

Type	TS EN 1504-2/ April 2008 Principle 5(PR): 5.1 Physical Resistance / Surface Improvement Coating Application (C)
Colour	Traspaerent
Outlook	Mat
Thinner	Epoxy Thinner
Solid Matter by Weight, %	40
Density	1,0 g/cm³
Waste	For 30 micron tickness at one coat 80 gr/m²
Package	14 kg A Component + 7 kg B Component:Total 21 kg
Flash Point	>25 °C
Mixture Ratio	2 / 1
Application Methods	Brush, Roller, Air Gun, Airless Gun
Mixture Life	1 hours / 25°C
Shelf Life	1 years
Waiting Time Between Coats	6 hours/ 25°C
Drying Time	12 hours/ 25°C
Mechanical Strength	7 days
Equipment Cleaning	Epoxy Thinner

SURFACE PREPARATION

The surfaces to be applied should be cleaned with acetone and free from oil and dust.

MIXING PREPARATION

A and B component should be mixed with a low speed mixer for at least 3-4 minutes until a homogenous mixture is obtained by paying attention to mixture ratios. It is ready for application after mixing.

APPLICATION CONDITIONS

Avoid application in very humid environments and below 10°C.

PROTECT AC 875

DEFINITION

PRODUCTS GROUPS

CONTACT US