ROAD AC 6388

DEFINITION

Solvented epoxy road line paint with two component has high adhesion and mechanical strength. .

USAGE AREAS

It is epoxy road line and marking paint which is used on asphalt and concrete roads, factories, assembly workshops, warehouses, airplane hangars, indoor and outdoor car parks in the determination of the road lines of all industrial floors and drawing special marks, has high adhesion strength and high abrasion resistance, easy to clean

Tipi	TS EN 1504-2/ April 2008 Principle 5(PR): 5.1 Physical Resistance / Surface Improvement Coating Application C
Colour	Standard White and Yellow of Road Line (RAL colors can be produced optionally)
Outlook	Semi Bright
Thinner	Epoxy Thinner
Solid Matter by Weight, %	67
Density Waste	1,40 g/cm³ At 2nd coat 400 – 500 gr/m²

Package	20 kg A Component+ 5 kg B Component: Total 25 kg
Flash Point	>25 °C
Mixture Ratio	4 / 1
Application Methods	Brush, Roller, Airless Gun, Air Gun
Mixture Life	1,5-2 hours / 25°C
Shelf Life	1 year
Waiting Time Between Coats	6 hours / 25°C
Drying Time	8 hours/ 25°C
Mechanical Strength	7 days
Equipment Cleaning	Epoxy Thinner

SURFACE PREPARATION

* The surfaces to be applied should be cleaned from all kinds of dirt, dust, oil and grease.

* It should not be used without roughening on the surface that curing material is used for concrete surface protection.

MIXING PREPARATION

A and B component should be mixed with a low speed mixer for at least 3-4 minutes until a homogenous mixture is obtained by paying attention to mixture ratios. It is ready for application after mixing.

APPLICATION METHODS

It can be applied by brush, roller and spray. In spray application, Thinsol AC 055 epoxy thinner is used for thinning.

APPLICATION CONDITIONS

*Avoid application in very humid environments and below 5°C.

* Discoloration may ocur in environments where exposed to direct sunlight but it does not adversely affect the mechanical strength performance of the product.

ROAD AC 6388

DEFINITION

PRODUCTS GROUPS

CONTACT US