-
EPOXY PRODUCTS
-
Floor Coatings
- PRIMER WG 032
- WALL WG 034
- BRV SC 105
- BRV SC-200 K
- PRIMER SC 210
- PRIMER SC 215
- PRIMER SC 220
- SC Z-230 Self Leveling C Komponent
- PRIMER SC 270
- PRIMER SC 325
- DECOFLOOR SC 330
- FLOOR SC 470
- SC 600
- WALL SC 605
- WALL SC 605-C
- BRV SC 610 • Solvent-Free Epoxy Topcoat
- BRV SC 620 • Solvent-Free Textured Epoxy Topcoat
- BRV SC 625 SOLVENT-FREE EPOXY TOP COAT NON-SLIP FLOOR PAINT
- FLOOR SC 645
- SC 650 ST
- FLOOR SC 902
- FLOOR SC 903
- BRV SC 905 • CHEMICAL RESISTANT SOLVENT-FREE EPOXY TOP COAT FOR VERTICAL SURFACES
- FLOOR SC 950
- FLOOR SC 1200
- FLOOR AC 6380
- ROAD AC 6388
- Waterproofing Products
- Repair Anchorage and Assembly Products
- Joint Filler and Ceramic Adhesive Products
- Wood Protection Adhesive and Lamination Products
- Natural Stone Protectors
- Water Reservoir & Drainpipe Insulation Products
- Anticorrosive Products For Metal Surfaces
- Thinners
-
Floor Coatings
-
POLYURETHANE PRODUCTS
- FLOOR COVERING AND PAINTING PRODUCTS
- WATERPROOFING PRODUCTS
- STRUCTURAL REINFORCEMENT REPAIR ANCHOR INSTALLATION PRODUCTS
- WOOD PROTECTOR, ADHESIVE AND LAMINATION PRODUCTS
- NATURAL STONE PROTECTIVE PRODUCTS
- ANTICORROSIVE PRODUCTS FOR METAL SURFACES
- CONCRETE SURFACE PROTECTION AND POLISHING PRODUCTS
- THINNERS
-
ACRYLIC PRODUCTS
- WATERPROOFING PRODUCTS
- FLOORING AND PAINTING PRODUCTS
- INTERIOR AND EXTERIOR INSULATION & PAINT PRODUCTS
- SPECIAL FLAME RETARDANT INSULATION PRODUCTS
DECOFLOOR SC 330
DEFINITION
Two component, solvent free, decorative transparent epoxy resin
USAGE AREAS
It is used as transparent epoxy resin with high UV resistance for decorative purposes in 3-dimensional epoxy floor coatings, on wooden surfaces, on the last floor of terrazo floor coating system, jewellery products.
| Type | TS EN 1504-2/April 2008 Principle 5(PR): 5.1 Physical Resistance / Surface Improvement Coating Application C |
| Colour | Transparent |
| Outlook | Bright |
| Solid Matter by Weight, % | 100 |
| Density | 1,10 gr/cm³ |
| Waste | 300-500 gr / m2 |
| Package | 15 kg A Component + 9 kg B Component: Total 24 kg |
| Flash Point | >25 °C |
| Mixture Ratio | 5 / 3 |
| Mixture Life | 30 minutes / 25°C |
| Shelf Life | 1 year |
| Waiting Time Between Coats | 12 hours / 25°C |
| Drying Time | 12 hours / 25°C |
| Mechanical Strength | 7 days |
| Equipment Cleaning | Epoxy Thinner |
SURFACE PREPARATION
The surfaces to be applied must be cleaned from oil, dust, and dirty
MIXING PREPARATION
A and B component should be mixed with a low speed mixer for at least 3-4 minutes until a homogenous mixture is obtained by paying attention to mixture ratios. It is ready for application after mixing.
APPLICATION CONDITIONS
* Avoid application at very humid environments and under 5°C.
* Mixing ratios should be considered.