FUGAPOX SC 360

DEFINITION

Two component, solvent free, high strength, chemical resistant, hygienic epox joint filler and ceramic adhesive.Public Works Pos. No: 04.380/013 .

Bayındırlık Poz. No: 04.380/013

USAGE AREAS

It is used in concrete, natural stone, aerated concrete, ceramic, restoration of historical buildings, filling of corner, crack dilation holes and cracks, where chemical resistance is required. It can also be used on vertical surfaces.

Type	TS EN 12004 (system 3)
Colour	White
Outlook	Mat
Solid Matter by Weight, %	99
Density	1,80 gr/cm³
Waste	Look at the waste table
Package	4,50 kg A Component + 1,50 kg B Component:Total 6 kg
Flash Point	>25 °C
Mixture Ratio	3 / 1
Application Methods	Trowel, Scraper
Mixture Life	50 minutes /25°C
Shelf Life	1 year
Waiting Time Between Coats	12 hours / 25°C
Drying Time Bending Strength	12 hours / 25°C 20 C de min. 28 N /mm²
Adhesion Strength (To steel) Breakage from concrete Pressure Strength	6,50 N/mm² (7 days) 3,50 N/mm² (7 days) 20 °C de min. 55 N/mm (7 Day )

SURFACE PREPARATION

The surfaces to be applied must be free from oil and dirty.

MIXING PREPARATION

A and B component should be mixed with a low speed mixer for at least 3-4 minutes until a homogenous mixture is obtained by paying attention to mixture ratios. It is ready for application after mixing.

APPLICATION CONDITIONS

* Avoid application in very humid environments and below 10°C.

* Mixing ratios should be considered.

* The excess material adhered to the ceramic or faience should be cleaned with hot water without waiting drying.

FUGAPOX SC 360

DEFINITION

USAGE AREAS

PRODUCTS GROUPS

CONTACT US