PROTECT PU 785

DEFINITION

Two component UV resistant flexible aliphatic polyurethane clear protective coating.

USAGE AREAS

It is used where it is desired to protect the surface from UV rays, on ceramic surfaces of terraces, roofs and swimming pools, in the insulation of the capillary cracks between the joints, on natural stone, wood, brick, concrete surfaces, where strength and dustiness against chemical substances, impact, abrasion are required.

Type	TS EN 1504-2/April 2008 Principle 5(PR): 5.1 Physical Resistance / Surface Improvement Coating Application C
Colour	Transparent
Outlook	Bright
Solid Matter by Weight, %	40
Solid Matter by Volume, %	35
Density	0,97 g/cm³
Waste	55 gr/m2- 95 gr/m2 (For 20-30 micron dry film tickness)
Package	17,5 kg A Component + 3,5 kg B Component: Total 21 kg
Flash Point	>25 °C
Mixture Ratio	5 / 1
Application Methods	Brush, Roller, Air Gun, Airless Gun
Mixture Life	1-1,5 hours/25 °C
Shelf Life	1 year
Waiting Time Between Coats	2 hours/25 °C
Drying Time	6 hours/25 °C
Mechanical Strength	7 days
Equipment Cleaning	Polyurethane Thinner

SURFACE PREPARATION

Free particles in the surface, paint residues, oil and dirties must be completely cleaned, brokens and cracks must be repaired and the surface must be absolutely roughened before application

MIXING PREPARATION

A and B component should be mixed with a low speed mixer for at least 3-4 minutes until a homogenous mixture is obtained by paying attention to mixture ratios. It is ready for application after mixing

APPLICATION CONDITIONS

* The surfaces must be free from humid and dust.

* Avoid application in very humid environments and below 10°C..

* Mixing ratios should be considered.

* Relative humidity must not exceed 70% when applied.

PROTECT PU 785

DEFINITION

PRODUCTS GROUPS

CONTACT US