-
EPOXY PRODUCTS
-
Floor Coatings
- PRIMER WG 032
- WALL WG 034
- BRV SC 105
- BRV SC-200 K
- PRIMER SC 210
- PRIMER SC 215
- PRIMER SC 220
- SC Z-230 Self Leveling C Komponent
- PRIMER SC 270
- PRIMER SC 325
- DECOFLOOR SC 330
- FLOOR SC 470
- SC 600
- WALL SC 605
- WALL SC 605-C
- BRV SC 610 • Solvent-Free Epoxy Topcoat
- BRV SC 620 • Solvent-Free Textured Epoxy Topcoat
- BRV SC 625 SOLVENT-FREE EPOXY TOP COAT NON-SLIP FLOOR PAINT
- FLOOR SC 645
- SC 650 ST
- FLOOR SC 902
- FLOOR SC 903
- BRV SC 905 • CHEMICAL RESISTANT SOLVENT-FREE EPOXY TOP COAT FOR VERTICAL SURFACES
- FLOOR SC 950
- FLOOR SC 1200
- FLOOR AC 6380
- ROAD AC 6388
- Waterproofing Products
- Repair Anchorage and Assembly Products
- Joint Filler and Ceramic Adhesive Products
- Wood Protection Adhesive and Lamination Products
- Natural Stone Protectors
- Water Reservoir & Drainpipe Insulation Products
- Anticorrosive Products For Metal Surfaces
- Thinners
-
Floor Coatings
-
POLYURETHANE PRODUCTS
- FLOOR COVERING AND PAINTING PRODUCTS
- WATERPROOFING PRODUCTS
- STRUCTURAL REINFORCEMENT REPAIR ANCHOR INSTALLATION PRODUCTS
- WOOD PROTECTOR, ADHESIVE AND LAMINATION PRODUCTS
- NATURAL STONE PROTECTIVE PRODUCTS
- ANTICORROSIVE PRODUCTS FOR METAL SURFACES
- CONCRETE SURFACE PROTECTION AND POLISHING PRODUCTS
- THINNERS
-
ACRYLIC PRODUCTS
- WATERPROOFING PRODUCTS
- FLOORING AND PAINTING PRODUCTS
- INTERIOR AND EXTERIOR INSULATION & PAINT PRODUCTS
- SPECIAL FLAME RETARDANT INSULATION PRODUCTS
FLOOR PU 130
DEFINITION
Two component, acrylic polyurethane protective matte paint
USAGE AREAS
It is used as top coat protective mat paint in epoxy and polyurethane coating systems desired UV resistance.
| Type | TS EN 1504-2/April 2008 Principle 5(PR): 5.1 Physical Resistance / Surface Improvement Coating Application C |
| Colour | RAL colours |
| Outlook | MAT |
| Thinner | Polyurethane Thinner |
| Solid Matter by Weight, % | 47 |
| Density | 1,15 g/cm³ |
| Waste | 0,50-0,100 kg / m2 |
| Package | 12 kg A Component + 5.6 kg B Component: Total 17.6 kg |
| Flash Point | >25 °C |
| Mixture Ratio | 2.15/1 |
| Application Methods | Brush, Roller, Air Gun, Airless Gun |
| Mixture Life | 1 hour / 25°C |
| Shelf Life | 1 year |
| Waiting Time Between Coats | 2 hours/25 °C |
| Drying Time | 12 hours /25 °C |
| Mechanical Strength | 7 days |
| Equipment Cleaning | Polyurethane Thinner |
SURFACE PREPARATION
The surfaces to be applied must be free from oil, dust, and dirty
olmalıdır..
MIXING PREPARATION
A and B component should be mixed with a low speed mixer for at least 3-4 minutes until a homogenous mixture is obtained by paying attention to mixture ratios. It is ready for application after mixing
The surfaces to be applied must be free from oil, dust, and dirty
olmalıdır..
MIXING PREPARATION
A and B component should be mixed with a low speed mixer for at least 3-4 minutes until a homogenous mixture is obtained by paying attention to mixture ratios. It is ready for application after mixing
APPLICATION CONDITIONS
* Application should not be applied if the ambient and surface temperature is below +10 ºC or above +30 ºC.
* Avoid application in rainy and windy weather.
* It must be protected against water for at least 24 hours after painting is completed.
* Relative humidity must not exceed 70% when applied
Products that can be used under this product:
* SC 650 ST Solvent Free Epoxy Resin Based Top Coat Coating
* PU 145 Polyurethane Self Leveling Coating
* PU 150 Polyurethane Self Leveling Semi Elastic Coating