SHINGLE GUARD
SHINGL GUARD
DEFINITION
It is a protective insulation coating for slated shinglings and bituminous membranes with specific chemical and physical properties, high strengtHdır.
USAGE AREAS
It is used to protect the old or new slated shinglings and bituminous membranes and bituminous surfaces used in the terraces and roofs of the buildings from adverse weather conditions, sun damaging rays and strength for a longer period of time.
Advantages
* It ensures that slated shinglings and bituminous membranes are prevented its degradation resulting in carbonization by affecting by the sun’s harmful UV rays and adverse weather conditions.
* Provides excellent water-repellent properties so that they are not affected by water.
* Thanks to its mineral fillings, it provides high abrasion resistance and resistance to bad weather conditions. It does not tear on the surface it is applied in the wind and storm.
* It does not fade and rewind over time thanks to special pigments resistant to UV rays used in the product content.
* Shinglings enable membranes to have more vibrant and bright decorative appearance
|
Type |
TS EN 1062-1 |
|
Colour |
White, Tile Red, Membrane Green, (optionally RAL colors) |
|
Outlook |
Matt |
|
Thinner |
Can be thinned with water. |
|
Solid Matter by Weight, % |
75 |
|
Density |
1,50 g/cm³ |
|
Waste |
0,400–0,600 kg/m2 |
|
Package |
5 kg – 20 kg in plastic bins |
|
Application Methods |
brush, roller, airless gun |
|
Shelf Life |
1 year |
|
Dust Drying Time |
1-2 hours /25 °C |
|
Touch Drying |
3-4 hours/25 °C |
|
Equipment Cleaning |
With water. |
SURFACE PREPARATION
The surfaces to be applied must be free from oil, dust, rust, dirty and all kind of residues. The floor is strong and durable, washing and cleaning the dust residue affects the performance of the product positively
APPLICATION CONDITIONS
ŞinPrior to the application of Shingle Guard, Poly Primer should be used as primer coat. Application can be done with roller, brush or airless gun.. Before use, mix with a mixer in its bucket for 2-3 minutes. If application is to be done with more than one coat, after first coat application, 12 hours at 25 ° C should be waited and the other coat should be applied. After application, over the shingles membranes must be protected for 48 hours under adverse weather conditions such as rain, hail, snow.
