PRIMER SC 215 • Solvent-Free Epoxy Primer
Two-component, low-viscosity, solvent-free epoxy primer.
Product Description:
This two-component, low-viscosity, solvent-free epoxy primer is a strong and reliable primer solution for industrial floors and concrete surfaces. Its solvent-free formula is environmentally friendly and user-friendly, offering low odor and safe working conditions during application. It provides excellent adhesion to the surface, creating a solid base for epoxy or polyurethane topcoats. Thanks to its low viscosity, it easily penetrates absorbent or normal surfaces such as concrete, cementitious mortar, and screed, providing a homogeneous coating.
Areas of application:
This epoxy primer is suitable for use on industrial floors subjected to medium to heavy loads, such as factory and warehouse floors, work areas, and loading zones. It can be safely applied to concrete, cementitious mortar, screed surfaces, and epoxy-based mortars. It can also be used as a primer before applying epoxy or polyurethane top coatings to improve their adhesion and durability.
Key Features:
- Provides deep penetration into the surface with low viscosity
- Environmentally and user-friendly with solvent-free formula
- Strong adhesion to concrete, screed, cementitious mortar and epoxy mortars
- Ideal primer for epoxy and polyurethane top coatings
- Durable performance on industrial floors subjected to medium and heavy loads
|
Type |
TS EN 1504-2/ April 2008 Principle 5(PR): 5.1 Physical Resistance / Surface Improvement Coating Application C |
||
|
Colour |
Colourless |
||
|
Outlook |
Transparent |
||
|
Solid Matter by Weight, % |
100 |
||
|
Density ( A Component) ( B Component ) (A+B Mixture density) |
1,10 gr/cm³
1.08 gr/cm³ |
||
|
Waste |
0,300 – 0,500 kg / m2 |
||
|
Package |
14 kg A Component + 7 kg B Component = Total 21 kg |
||
|
Flash Point |
>25 °C |
||
|
Mixture Ratio |
2 / 1 |
||
|
Application Methods |
Brush, Roller, Trowell, Airless Gun |
||
|
Mixture Life (Pot life) |
30 minutes / 25°C |
||
|
Shelf Life |
1 year |
||
|
Waiting Time Between Coats |
12 hours / 25°C |
||
|
Drying Time |
12 hours / 25°C |
||
|
Mechanical Strength Pressure Resistance (EN 196-1) Bending Strength (EN 196-1) Adhesion Strength (EN 4624) Shore D Hardness (DIN 53505) |
7days 95 N/mm² 30 N/mm² >1.5 N/mm² 83 (%50 Relative humidity / 23 ºC 7days) |
||
|
Equipment Cleaning |
Epoxy Thinner |
||
SURFACE PREPARATION
Free particles and paint residues on the surface must be thoroughly cleaned, brokens and cracks must be repaired, surfaces should be roughened mechanically (blastrack or milling router) and cleaned from vacuum with vacuum cleaner
MIXING PREPARATION
A and B component should be mixed with a low speed mixer for at least 3-4 minutes until a homogenous mixture is obtained by paying attention to mixture ratios. It is ready for application after mixing.
APPLICATION CONDITIONS
* Surface should have sufficient strength. The concrete should have a compressive strength of at least 25 N/mm² and a tensile strength of at least 1,5 N/mm².
* Surfaces must be clean, smooth and dry. Humid is not pass 5%. If the humidity is above this ratio, SC 220 Epoxy Prime for Humid Surfaces should be preferred.
* The SC 215 should be completed its curing before the top coat coating is started.
* Avoid application in very humid environments and below 5°C.
* Mixing ratios should be considered. Products that can be used upper this product :
* SC 650 ST Solvent Free Epoxy Resin Based Top Coat Coating
* SC 605 Epoxy Top Coat Paint for Vertical Surfaces
* SC 645 Orange Coat Patterned Top Coat Epoxy Coating
* SC 800 Hygienic Epoxy Top Coat Coating and Paint for Potable Water Reservoir a
* SC 902 Solvent Free Epoxy Top Coat Coating.
* SC 905 Solvent Free Epoxy Paint Resistant to Chemical Matter for Vertical Surfaces
* SC 950 Solvent Free Epoxy Coating Resistant to Chemical Matter
* SC 1200 Modular Container Epoxy Floor Coating
* PU 145 Polyurethane Self Leveling Coating
* PU 150 Polyurethane Semi-Elastic Self Leveling Coating
* PU 160 Polyurethane Elastic Water Isolation Membrane
* PU 170 Polyurethane Water Isolation Membrane
