PRIMER SC 092 Epoxy Wood Bonding Bridge
Two-Component, Low-Viscosity Epoxy Wood Bonding Bridge
PRODUCT DESCRIPTION
This two-component, low-viscosity epoxy-based wood bonding bridge is a specialized pre-coating system developed to provide superior adhesion between wood and concrete surfaces.
Thanks to its low viscosity, it deeply penetrates the pores of the wood surface, creating a robust bond between the substrate and the material to be bonded. It exhibits excellent performance in fiber laminations or other bonding processes applied over wooden surfaces.
Upon curing, it provides high mechanical strength and ensures the bonded element fully adheres to the surface.
AREAS OF USE
-
Bonding of wooden surfaces.
-
Bonding wood to concrete surfaces.
-
As a bonding bridge prior to fiber lamination applications.
-
All applications requiring high adhesion between wood and composite materials.
KEY FEATURES
-
Low Viscosity: Deep penetration into the surface for superior bonding.
-
High Adhesion: Excellent grip on both wood and concrete substrates.
-
Lamination Primer: Ideal pre-coating for fiber-reinforced polymer (FRP) laminations.
-
High Mechanical Strength: Enhances the structural integrity of the bond.
-
Durable Connection: Forms a tough and resilient bond after curing.
-
User-Friendly: Easy application and reliable performance.
|
Type |
TS EN 1504-2/ April 2008 Principle 5 (PR): 5 1 Physical Resistance / Surface Improvement Coating Application (C) |
|
Colour |
Colourless |
|
Outlook |
Transparent |
|
Solid Matter by Weight, % |
38 |
|
Density |
0,96 g/cm³ |
|
Waste |
0,150–0,400 kg/m2 (Variable depending on surface suction power) |
|
Package |
17,5 kg Component + 2,5 kg B Component = Total 20 kg |
|
Flash Point |
>25 °C |
|
Mixture Ratio |
7 /1 |
|
Application Methods |
Brush, Roller, Air Gun, Airless Gun |
|
Mixture Life |
4 hours / 25 °C |
|
Shelf Life |
1 year |
|
Waiting Time Between Coats |
12 hours / 25 °C |
|
Drying Time |
12 hours / 25 °C |
|
Mechanical Strength |
7 days |
|
Equipment Cleaning |
Epoxy Thinner |
SURFACE PREPARATION
*The free particles on the surface should be completely cleaned and mechanically the surfaces should be roughened with sandpaper and cleaned from dust.
MIXING PREPARATION
A and B component should be mixed with a low speed mixer for at least 3-4 minutes until a homogenous mixture is obtained by paying attention to mixture ratios. It is ready for application after mixing.
APPLICATION CONDITIONS
* Surface should have sufficient strength.
* The surface must be clean and dry. Humidity must not exceed 5%.
* The SC 092 Epoxy adhesion bridge must have been completed ıts curing before the top coat is applied.
* Avoid application in very humid environments and below 5°C.
* Mixing ratios should be considered.
