PRIMER AC 080 • Surface Tolerant Epoxy Primer
Two-component, solvent-based epoxy resin-based, anti-corrosive surface-tolerant epoxy primer.
Product Description:
This is a two-component, solvent-based, epoxy resin-based, surface-tolerant anti-corrosion primer. It is specifically developed to provide strong adhesion and corrosion protection on lightly to moderately rusted metal surfaces where ideal surface preparation is not possible.
Thanks to its special formula, it exhibits high adhesion to the surface even in areas where full sandblasting is not feasible, and forms a durable protective film layer resistant to external influences. It provides long-term resistance to corrosion that may occur in humidity, atmospheric conditions, and industrial environments.
It can be safely applied to existing rusty surfaces in maintenance and repair projects.
Areas of application:
- Metal surfaces where surface cleaning cannot be achieved to the ideal level
- Lightly to moderately rusted steel surfaces
- Maintenance and repair applications
- Industrial steel structures
- Outdoor metal surface protection systems
Öne Çıkan Özellikler:
- Surface-tolerant formula
- High adhesion on rusty metal surfaces
- Provides anti-corrosion protection
- Resistant to moisture and atmospheric conditions
- Ideal for maintenance & repair projects
- Long-lasting protective primer system
|
Type |
TS EN ISO 12944-5 |
||
|
Colour |
White, Gray, Beyaz, Gri, Oxide Red, Oxide Yellow |
||
|
Outlook |
Mat |
||
|
Thinner |
Epoxy Thinner |
||
|
Solid Matter by Weight, % |
80 |
||
|
Density |
1,50 g/cm³ |
||
|
Waste |
For 40 micron at single coat 80 gr/m² |
||
|
Package |
21 kg A Component + 3 kg B Component: Total 24 kg |
||
|
Flash Point |
>25 °C |
||
|
Mixture Ratio |
7 / 1 |
||
|
Application Methods |
Brush, Roller, Air Gun, Airless Gun |
||
|
Mixture Life |
1 hour / 25°C |
||
|
Shelf Life |
1 year |
||
|
Waiting Time Between Coats |
6 hours/25 °C |
||
|
Drying Time |
12 hours/25 °C |
||
|
Mechanical Strength |
7 days |
||
|
Equipment Cleaning |
Epoxy Thinner |
||
SURFACE PREPARATION
Surface preparation is very important so that the epoxy paint can show the expected performance. The surface must be mechanically grounded and sanded to remove dirt, dust, grease and oil. It is especially recommended to sandblast at least Sa 1 degree according to Swedish standard SIS 05 59 00 for surface cleaning. The first coat of primer is applied immediately after sandblasting..
MIXING PREPARATION
A and B component should be mixed with a low speed mixer for at least 3-4 minutes until a homogenous mixture is obtained by paying attention to mixture ratios. It is ready for application after mixing.
COATING SYSTEM
In application with primer prepared, bolt heads, welding seams and sharp edges should be taken care of. Metal surfaces should be applied one or two coats with a total dry film thickness of 40-50 microns
APPLICATION CONDITIONS
Avoid application in very humid environments and below 10°C Products that can be used upper this product
* AC 6390 Epoxy Top Coat Paint For Metal Surfaces
