POWERMIX PW
POWERMIX PW
DEFINITION
Ready-to-use, high-strength, mineral-filled, fluid-viscosity acrylic mortar and waterproofing coating with specific chemical and physical properties.
USAGE AREAS
It is used on the terraces and roofs of the buildings, in the floor terraces and roofs forming a wet volume and water ponding, on concrete, plaster, wood, osb, mdf, gas concrete, betopan and other mineral surface elements, in basic curtain concrete, inside and outside of the buildings, on insulated surfaces at old buildings with problem, on concrete surfaces and stone surfaces.
|
Type |
TS EN 1504-2/ April 2008 Principle 2 (MC): Humid control: 2.2 Coating application (C) , |
|
Colour |
White, Gray (RAL colors can be produced on request) |
|
Outlook |
Matt |
|
Thinner |
Can be thinned with water. |
|
Solid Matter by Weight, % |
75 |
|
Density |
1,50 g/cm³ |
|
Waste |
0,800 – 1,000 kg / m2 |
|
Package |
20 kg |
|
Application Methods |
Brush, Roller, Airless Gun |
|
Shelf Life |
1 year |
|
Dust Drying Time |
1-2 hours /25 °C |
|
Touch Drying |
3-4 hours/25 °C |
|
Equipment Cleaning |
Clean with water. |
SURFACE PREPARATION
* The soil to be applied must be cleaned from oil, dirt, rust, dust and all kinds of residues.
* Durableness and endurance of soil, cleaning from dust residues affects product performance positively
APPLICATION CONDITIONS
Polimero Primer should be used as a primer coat before the application of Powermix PW. Application can be made with a drawer, roller, trowel or airless gun. Before use, mix with a mixer in its bucket for 2-3 minutes. If the application is carried out with more than one coat, after application of the first coat, wait 12 hours at 25 ° C and apply another coat. After application, the floor must be protected from adverse weather conditions such as rain, hail, snow, etc. for 48 hours. It is recommended to apply to the surface POLIMERO PU MS 1K Flexible waterproofing coating as single or double coat on request. POLİMERO PU MS 1K Flexible waterproofing coating can also be used as a primer with 20% dilution.
