FLOOR AC 6380 • Epoxy-based topcoat paint for concrete surfaces.
Two-component, solvent-based epoxy resin-based topcoat paint.
Product Description:
This two-component, solvent-based epoxy resin topcoat paint is developed to provide high performance on industrial floor and wall surfaces. Thanks to its special formula, it forms a hard, durable, and abrasion-resistant film layer on the surface.
Its high mechanical strength ensures long-lasting use in areas exposed to heavy pedestrian and equipment traffic. Its solvent-based composition allows for strong penetration and offers high adhesion performance on concrete and metal surfaces. It creates a smooth, hygienic surface that is easy to clean.
It offers a topcoat solution resistant to chemicals, impacts, and abrasion in industrial environments.
Areas of application:
- Factories
- Assembly workshops
- Warehouses
- Aircraft hangars
- Shops
- Parking lots
- Food processing plants
- Hospitals
- Chemical and pharmaceutical industry
- Power plants
- All industrial floor and wall surfaces
Key Features:
- High mechanical strength
- Abrasion resistant
- Strong adhesion (to concrete and metal surfaces)
- Easy-to-clean surface
- Long-lasting solution for industrial use
- Suitable for floor and wall applications
|
Type |
TS EN 1504-2/April 2008 Principle 5(PR): 5.1 Physical Resistance / Surface Improvement Coating Application C |
||
|
Color |
RAL colors |
||
|
Appearance |
Semi lustrous |
||
|
Thinner |
Epoxy Thinner |
||
|
Solid Matter by Weight, % |
67 |
||
|
Density |
1,40 g/cm³ |
||
|
Waste |
In 2 coats 400 – 500 gr/m² |
||
|
Package |
20 kg A Component+ 5 kg B Component: Total 25 kg |
||
|
Flash Point |
>25 °C |
||
|
Mixing Ratio |
4 / 1 |
||
|
Application Methods |
Brush, Roller, Air Gun, Airless Gun |
||
|
Mixture Life |
1,5-2 hours / 25°C |
||
|
Shelf Life |
1 year |
||
|
Waiting time between coating |
6 hours / 25°C |
||
|
Drying Time |
8 hours/ 25°C |
||
|
Mechanical Strength |
7 days |
||
|
Equipment Cleaning |
Epoxy Thinner |
||
SURFACE PREPARATION
The surfaces to be primed need to be cleared of all types of rust, roller shell, dirt, dust, oil and grease. Sand blasting at least SA 2½ level, in accordance with the Swedish standard SIS 05 59 00, is especially suggested for surface cleaning. For surface roughness, abrasives should be used to provide Medium G 30-85 micron level and meet ISO 8503-2.
MIXTURE PREPARATION
Using a low speed mixer, it should be mixed for at least 3-4 minutes to attain an homogeneous mixture while paying attention to A and B component mixture rates. It is ready for application after mixing.
COATING SYSTEM
It can be applied using a brush, roller or blasting. In application using blasting, thinner is used for thinning. The paint thinned at20°C for 18-20 secs to /DIN CUP4/ viscosity can be applied on metal using a gun to provide 35-40 micron dry film. The mixture prepared by brush or roller does not need thinning before moving on to application.
APPLICATION CONDITIONS
*Application should be avoided below 5°C and in extremely humid conditions
* Yellowing may occur when subjected to direct sunlight however it doesn’t
* adversely impact the product’s prevention performance.
Products suggested to be used under this product:
* PRIMER SC 215 Epoxy Primer without solvent
* PRIMER SC 270 Low viscosity Epoxy Impregnated Prime
