COALTAR AC 2800 • Solvent-Free Epoxy Coal Tar Paint
Two-component, solvent-free epoxy coal tar paint.
Product Description:
This is a two-component, solvent-free, epoxy resin-based, coal tar modified high-performance protective paint. It is developed to provide heavy-duty corrosion protection for steel and concrete structures embedded in water and soil.
Thanks to its solvent-free composition, it forms a high film thickness and provides strong adhesion to the surface. It exhibits high resistance to abrasion, rust, salt water, wastewater, and aggressive chemicals.
It can be applied alone or as a topcoat over epoxy primers and intermediate coat systems.
Optionally:
100% moisture tolerant formulation
Thixotropic (non-sagging on vertical surfaces) version
can be produced.
Areas of application:
- Steel structures buried in water and soil
- Underground and above-ground concrete structures
- Wastewater pipes (concrete and metal)
- Tank interior surfaces
- Treatment plants
- Structures exposed to saltwater
- Infrastructure elements requiring chemical resistance
Key Features:
- Solvent-free, high film thickness
- Coal tar modified heavy-duty protection
- High abrasion and impact resistance
- Resistant to saltwater and chemicals
- Suitable for underground applications
- Can be applied alone or as a system layer
- Optional 100% moisture tolerant production
- Optional thixotropic (does not sag on vertical surfaces) version
| Type | TS 11589 |
|---|---|
| Color | Black |
| Appearance | Glossy |
| Thinner | Epoxy Thinner |
| Solid Content (by Weight) | 100% |
| Density | 1.21 g/cm³ |
| Consumption | 0.150–0.250 kg/m² |
| Packaging | 14 kg Component A + 7 kg Component B (Total: 21 kg) |
| Flash Point | >25 °C |
| Mixing Ratio | 2 / 1 |
| Application Methods | Brush, Roller, Air Spray Gun, Airless Spray Gun |
| Pot Life | 30 minutes (at 25°C) |
| Shelf Life | 1 year |
| Recoat Time | 12 hours (at 25°C) |
| Drying Time | 12 hours (at 25°C) |
| Mechanical Strength | 7 days |
| Equipment Cleaning | BRV Epoxy Thinner |
SURFACE PREPARATION
* All materials must be primed, clean, and dry.
* Surfaces to be coated must be free of oil and dust.
* Previously painted and composite surfaces should be cleaned with epoxy thinner, then sanded with 80-120 grit sandpaper.
MIXING PREPARATION
Components A and B should be mixed using a low-speed mixer for at least 3-4 minutes until a homogeneous mixture is obtained, paying attention to the mixing ratios. The mixture is ready for application after mixing.
COATING SYSTEM
Applied with a brush, roller, and airless spray gun. For airless spray gun application, BRV Epoxy Thinner should be used for thinning. For thicknesses of ˃150 microns, the number of application coats should be increased.
APPLICATION CONDITIONS
* Application should be avoided below 10°C and in very humid environments.
Products recommended for use under this product:
* AC 070 Epoxy Zinc Rich Primer
SAFETY
This product is for professional use only. Before use, please read the safety warnings on the packaging and, if necessary, refer to the product’s Material Safety Data Sheet. Do not inhale, avoid contact with skin and eyes, do not swallow, use appropriate safety equipment. Take necessary precautions to prevent fire and explosion hazards, as well as environmental pollution. Apply in well-ventilated areas.
TRANSPORT AND STORAGE
* The product should be stored between 5-35°C.
* The product should not be exposed to direct sunlight.
* Once opened, the product should be stored in its original packaging with the lid tightly closed.
NOTE
BRV reserves the right to make improvements/revisions to this product and this technical document over time. This Technical Data Sheet supersedes any previously published Technical Data Sheet for this product and is valid for 5 years. The user must ensure that the technical documentation in their possession is the most up-to-date version; if necessary, they should contact our company to verify the document’s currency. It is the applicator’s responsibility to ensure that the product is used as intended and that the application conditions and methods are valid. BRV Epoxy Paint does not accept any warranty claims for consequences arising from improper application of the products, work accidents, direct or indirect damages, or losses. The packaging values stated above are nominal values in standardized formulas by BRV. Under normal production conditions, deviations from the limits stipulated in international standards may occur.
