BETOGUARD 707 CONCRETE PROTECTIVE COATING
DEFINITION
It is a one component acrylic polyurethane concrete protection system with high penetration property, transparent wet appearance, high dust resistance and high mechanical strength on the surface.
Public Works Pos. No: 04.379/F01
USAGE AREAS
All kinds of old rusty and dusty concrete surfaces, polished or unpolished concrete surfaces that is newly poured concrete and completed 28 days curing.
On concrete surfaces with wet shrinkage cracks
* In production areas of factories
* In outdoor concrete
* At indoor and outdoor parking areas
* In all areas with concrete surface
* In protecting all cement based surface coatings and increasing their life time.
ADVANTAGES
-
Ready to use and easy to apply.
-
High penetration capability.
-
Resistant to harsh weather conditions and harmful UV rays.
-
Creates a waterproof surface due to its silane-siloxane modified structure.
-
Protective against alkaline and acidic staining agents.
-
Prevents surface abrasion by creating a hard and durable finish.
-
Provides a decorative and aesthetic appearance.
-
Creates a slight wet-look effect on the applied surface.
-
Prevents dirt accumulation and creates easy-to-clean glossy surfaces.
-
Has no adverse side effects on the physical properties of the applied surface.
-
A protective product that withstands heavy or light traffic, including transport vehicles like forklifts and pallet jacks.
| Colour | Transparent |
| Outlook | Bright |
| Thinner | Ready to use |
| Density | 0,95 gr/cm³ |
| Wastet | Between 100 gr – 150 gr /m² at single coat depending on the roughness and suction condition of the application surface. |
| Package | In 4 kg, 15 kg tin cans |
| Application Methods | With brush, roller, air or airless gun |
| Application Temperature | +5 C – + 30 C |
| Shelf Life | 1 year |
| Drying Time | Full drying 24 hours |
| Equipment Cleaning | Cellulosic thinner |
SURFACE PREPARATION
It is necessary to completely remove the oil, dirt, rust and all kinds of residues on the surfaces to be applied. When deemed necessary, surface polishing application with special diamonds and pad polishers may be necessary on old and new concrete surfaces.
APPLICATION CONDITIONS
The product is ready for use. It is applied at least two coats on high suction, textured and rough surfaces. It should be applied with a break of at least 1 hour between both coats. The full performance of the product must be tested at least 24 hours later. Good ventilation should be provided in applications to be performed in confined spaces. No smoking during application and solvent vapors should not be inhaled.
