SUPER CONCRETE NATRIUM GUARD
DEFINITION
Sodium silicate is a surface thickener and hardener to obtain a shiny appearance on the surface, to increase the physical strength of the concrete surface on all concrete surfaces, to prevent dusting
Public Works Pos.No: 04.379/F01
USAGE AREAS
New or old concrete surfaces, cement based mineral surfaces, storage areas, factories, factories, multi-storey car parks, airplane hangars, work place buildings, cold storage warehouses, food industry factories, pharmacy stores, laboratories and all enterprises with concrete floors.
ADVANTAGES
-
Easy to apply.
-
High penetration capability (2-8 mm from the surface).
-
Water-based.
-
Contains nanotechnological sodium silicate.
-
Provides maximum anti-dusting on concrete surfaces.
-
Creates a glossy concrete surface with high mechanical strength.
-
Prevents efflorescence (salt blooming), flowering, and staining.
-
Penetrates deeply into the concrete, reacting chemically with the lime in the concrete structure to form an insoluble bond.
-
Can be used as a curing agent on freshly poured concrete.
-
Allows the concrete surface to breathe (vapor permeable).
-
Easy to maintain and clean.
-
Extends the service life of the concrete.
-
Environmentally friendly and safe for human health thanks to its low VOC content.
|
Colour |
Transparent |
|
Outlook |
Bright |
|
Thinner |
Ready to use |
|
Solid Matter by Weight, % |
27 ± 2 |
|
Dnensity Surface penetration |
1,20 gr/cm3 2- 8 mm |
|
Waste |
Between 100 gr – 250 gr/m2 at single coat depending on the roughness and suction condition of the application surface. |
|
Package |
5, 10, 20 kg in plastic bins |
|
Application Methods |
brush, roller, air or airless gun |
|
Application Temperature |
It must be applied between +5 +40 ºC. |
|
Shelf Life |
1 year |
|
Drying Time 2nd coat application time |
1-2 hours /25 °C Without leaving the product when the first coat is completely dry after 4 – 5 hours |
|
Equipment Cleaning |
Water |
SURFACE PREPARATION
The surfaces to be applied must be free from oil, dust, rust, dirty and all kind of residues. Acid-containing cleaners should not use as they will degrade the surface properties of the concrete floor to be applied.
APPLICATION
The product is applied to the surface to be applied by low pressure machine or by means of soft pile brush. The surface is kept wet for at least 30 minutes and during this time, the product is thoroughly rubbed with a soft brush. After application, the gelled product on surface is watered and removed with a rubber tipped scrubber or water-based machine so that no residue remains on the surface. After the surface has dried, no residue should remain on the surface. For extra shine it can be polished with special pads with surface wiping machine.
