SEAL TK 075
DEFINITION
One component water-based, transparent concrete and natural stone protector with high content of alkyl alkoxysilane based high purity
Public Works Pos.No.: 04.559/01
USAGE AREAS
All kinds of concrete and mineral surfaces, mosaic surfaces, natural stones (marble, travertine, slate, granite, synthetic and natural stone flooring)
|
Type |
TS EN 1504-2/ April 2008 Principle 5 (PR): 5.1 Physical Resistance / Surface Improvement Coating Application (C) |
|
Colour |
White – Transparent when applied |
|
Outlook |
Bright |
|
Thinner |
Ready to use |
|
Density Solid Matter Chloride penetration (concrete) Water absorption test (concrete) Flash Point – ASTM D 3278-82 |
1,02 gr/cm3 %20 %7 %5-8 >90°C |
|
Waste |
Between 0,100 kg–0,250 kg/m2 at single coat depending on the roughness and suction condition of the application surface |
|
Package |
1 kg, 4 kg, 15 kg in plastic bins |
|
Application Methods |
brush, roller, air or airless gun |
|
Application Temperature |
+5 °C + 30 °C |
|
Shelf Life |
1 year |
|
Drying Time |
24hours/25 °C |
|
Equipment Cleaning |
Water |
SURFACE PREPARATION
The surfaces to be applied must be free from oil, dust, rust, dirty and all kind of residues.
APPLICATION CONDITIONS
The product is ready for use. It is applied at least two coats on high suction, textured and rough surfaces. . It should be applied with a break of at least 1 hour between both coat. The full performance of the product must be tested at least 24 hours later. Good ventilation should be provided in applications to be performed in confined spaces.
