SEAL TK 055
DEFINITION
Silane siloxane modified solvented, transparent acrylic polyurethane concrete and natural stone preservative with single component, high penetration
Public Works Pos. No: 04.559/02
USAGE AREAS
All kinds of concrete and mineral surfaces, mosaic surfaces, natural stones (marble, travertine, slate, granite, synthetic and natural stone flooring,)
* Easy to apply,
* Has high penetration ability.
* Resistant to UV rays.
* Waterproof
* Protector against alkaline and acidic stain forming products (Tea, coffee, ketchup, mayonnaise, coke, etc)
* Prevents surface wears because it forms a hard and durable surfac.
* Creates a decorative and aesthetic appearance on the surfaces.
* Creates slightly wet appeaarance on the applied surface.
|
Type |
TS EN 1504-2/ April 2008 Principle 5 (PR): 5.1 Physical Resistance / Surface Improvement Coating Application (C) |
|
Colour |
Transparent |
|
Outlook |
Bright |
|
Thinner |
Ready to use If necessary it can be thinned with polyurethane thinner. |
|
Density |
0,95 gr/cm³ |
|
Waste |
Between 50gr–200 gr/m² at single coat depending on the roughness and suction condition of the application surface. |
|
Package |
4 kg, 15 kg in tin cans |
|
Application Methods |
brush, roller, air or airless gun (11-13 nozul meme ucu) |
|
Application Temperature |
+5 C – + 30 C |
|
Shelf Life |
1 year |
|
Drying Time |
Full drying 24 hours |
|
Equipment Cleaning |
Polyurethan Thinner |
SURFACE PREPARATION
The surfaces to be applied must be free from oil, dust, rust, dirty and all kind of residues.
APPLICATION CONDITIONS
* The product is ready for use.
* It is applied at least two coats on high suction, textured and rough surfaces.
* The application is made by roller and the soft bristle brushing over allows the product to be homogeneously distributed on the surface. It should be applied with a break of at least 1 hour between both coats.
* The full performance of the product must be tested at least 24 hours later..
* Good ventilation should be provided in applications to be performed in confined spaces.
* No smoking during application and solvent vapors should not be inhaled
