BRV SC 105 Epoxy Fiber Laminating Resin
Two-Component, Solvent-Free Epoxy Fiber Laminating Resin
PRODUCT DESCRIPTION
This two-component, solvent-free epoxy-based laminating resin features high adhesion and excellent fiber wetting-out capacity. It is specifically formulated to be applied on vertical surfaces without sagging and allows for reliable performance even in damp environments.
Upon curing, it provides high mechanical strength and durability, integrating powerfully with the substrate to ensure long-lasting performance in lamination processes. it can be used safely on concrete, wood, metal, and composite surfaces.
AREAS OF USE
-
Fiber lamination on concrete surfaces (Structural strengthening).
-
Structural wood lamination applications.
-
Lamination processes on metal surfaces.
-
Lamination of various composite materials.
KEY FEATURES
-
Solvent-Free: Environmentally friendly and low-odor formula.
-
Superior Wetting-Out Capacity: Ensures full saturation of fiber fabrics.
-
Non-Sag: Formulated for vertical and overhead applications without running.
-
Moisture Tolerant: Can be safely applied in damp conditions.
-
High Adhesion: Excellent bond strength to concrete, wood, metal, and composites.
-
High Mechanical Resistance: Exceptional tensile and compressive strength after curing.
|
Type |
ASTM D 2344 / D 2344 M : 00 (2006) |
|
Colour |
Blurred |
|
Outlook |
Mat |
|
Solid Matter by Weight, % |
100 |
|
Density |
1,10 gr/cm³ |
|
Waste |
0,400 – 0,600 kg / m2 |
|
Package |
15 kg A Component + 15 kg B Component: Total 30 kg |
|
Flash Point |
>25 °C |
|
Mixture Ratio |
1 / 1 |
|
Application Methods |
Brush, Roller, Trowell |
|
Mixture Life |
30 minute / 25 °C |
|
Shelf Life |
1 year |
|
Waiting Time Between Coats |
12 hours / 25 °C |
|
Drying Time |
12 hours / 25 °C |
|
Mechanical Strength |
7 days |
|
Equipment Cleaning |
Epoxy Thinner |
SURFACE PREPARATION
* The surfaces should be roughened with blastrac or diamond grainder on concrete surfaces.
* After priming with SC 215 solvent free epoxy primer on concrete surfaces and with SC 092 epoxy adhesion bridge primer on wooden surfaces, lamination process should be started.
* Other surfaces to be applied should be abraded with suitable sandpaper and cleaned from oil and dust by cleaning thinner.
MIXING PREPARATION
A and B component should be mixed with a low speed mixer for at least 3-4 minutes until a homogenous mixture is obtained by paying attention to mixture ratios. It is ready for application after mixing
APPLICATION CONDITIONS
* Avoid application below 5°C.
* Mixing ratio should be considered.
* It can be applied crosswise to create form at the body.
USAGE METHODS
FIBER LAMINATION
Lamination Plywood should be roughened with appropriate sandpaper and cleaned with acetone. SC 105 Epoxy Fiber Lamination Resin is applied with a brush or roller until the adhesive bridge is formed. The fibers are laid on, polished with aluminum roller, the fiber is thoroughly saturated with resin. Attention should be paid to ensure that the ends of the fibers do not fall outside the lamination surface. Thus, the first layer of fiber lamination is completed. In case of 2nd and 3rd coat fiber lamination, sanding is repeated if the waiting time between coats is upper then 24 hours (at 25°C).
