BRV SC 610 Solvent-Free Epoxy Topcoat
Two-component, solvent-free epoxy topcoat paint.
Product Description:
This two-component, solvent-free epoxy topcoat paint is a high-performance coating solution for industrial floors and surfaces. With its high mechanical strength and abrasion resistance, it is durable against heavy traffic and loads. Its easy-to-clean structure and solvent-free formula make it suitable for use in hygienic areas and offer advantages in terms of both environmental protection and user health. It provides strong adhesion to metal, wood, and concrete surfaces and can be safely applied to both vertical and horizontal surfaces.
Areas of application:
This epoxy topcoat paint can be used in industrial areas where hygiene and durability are important, such as factories and assembly plants, warehouses, aircraft hangars, shops, parking lots, food facilities, hospitals, chemical and pharmaceutical industries, and power plants. It can be applied as a topcoat paint on metal, wood, and concrete floors, providing an aesthetic and durable coating on vertical and horizontal surfaces.
Key Features:
- High mechanical strength and abrasion resistance
- Easy to clean and hygienic
- Strong adhesion to metal, wood and concrete surfaces
- Safe to use on vertical and horizontal surfaces
- Environmentally and user-friendly with solvent-free formula
- Ideal for industrial floors and areas requiring hygienel
Type TS EN 1504-2 / April 2008
Principle 5 (PR): 5.1 Physical Resistance / Surface Protection Coating (C)
Color RAL colors
Appearance Glossy
Solids Content by Weight (%) 98
Density 1.60 g/cm³
Consumption Vertical surfaces (two coats), horizontal surfaces (single coat):
0.200–0.300 kg/m²
Packaging
20 kg Component A + 4 kg Component B: Total 24 kg (Pail)
5 kg Component A + 1 kg Component B: Total 6 kg (Gallon)
Flash Point 25 °C
Mixing Ratio 5 : 1 (by weight)
Application Methods Brush, Roller, Trowel, Airless Spray
Pot Life 30 minutes at 25°C
Shelf Life 1 year
Overcoating Interval 12 hours at 25°C
Drying Time 12 hours at 25°C
Time to Mechanical Strength 7 days
Shore D Hardness 80 (7 days at 25°C)
Reaction to Fire Class Cfl
Equipment Cleaning Epoxy Thinner
SURFACE PREPARATION
Concrete Surfaces:
Surfaces must be free from oil, dust, dirt, and contaminants.
Loose particles, cement laitance, and materials preventing adhesion must be removed.
Metal Surfaces:
Surfaces to be primed must be thoroughly cleaned of rust, mill scale, dirt, dust, oil, and grease.
MIXING INSTRUCTIONS
Component A and Component B must be mixed according to the specified mixing ratio using a low-speed mixer for at least 3–4 minutes until a homogeneous mixture is obtained.
After mixing, the material is ready for application.
COATING SYSTEM
Concrete substrates must be primed with SC 215 Solvent-Free Epoxy Primer or SC 270 Low Viscosity Epoxy Impregnation Primer.
For damp surfaces, SC 220 Epoxy Primer for 100% Damp Surfaces must be used.
Painting can be carried out after the primer has cured (12 hours at 25°C).
For brush or roller applications, epoxy-specific rollers must be used.
Where high UV resistance is required, application of PU 125 Protective Coating at a consumption rate of 0.150–0.200 kg/m² is recommended.
APPLICATION CONDITIONS
-
Avoid application below 5°C and in very humid environments.
-
Mixing ratios must be strictly observed.
SAFETY
This product is intended for professional use only.
Before use, carefully read the safety instructions on the packaging and consult the Material Safety Data Sheet (MSDS) if required.
Do not inhale vapors; avoid contact with skin and eyes; do not ingest.
Use appropriate personal protective equipment.
Take necessary precautions against fire, explosion, and environmental contamination.
Apply only in well-ventilated areas.
TRANSPORT & STORAGE
-
Store between 5–35°C.
-
Protect from direct sunlight and frost.
-
Store opened products in their original packaging with the lid tightly closed.
NOTES
BRV reserves the right to make improvements and/or revisions to the product and this technical document over time.
This Technical Data Sheet supersedes all previously issued versions for this product and is valid for 5 years.
Users must ensure that they are using the most current version of this document and should contact the manufacturer if necessary.
Correct use of the product, application conditions, and application methods are the responsibility of the applicator.
BRV Epoxy Paint accepts no liability for consequences arising from improper application, work accidents, or any direct or indirect damage or loss.
The packaging values stated above are nominal values based on standardized formulations. Minor variations may occur under normal production conditions in accordance with international standards.
No image available.