PRIMER SC 325 • Epoxy-Based Conductive Primer
Two-component, solvent-free conductive epoxy primer.
Product Description:
This two-component, solvent-free epoxy resin-based conductive epoxy primer is a high-performance product specifically developed for antistatic floor coating systems. It ensures safe use in sensitive industrial areas containing electrical and electronic equipment. Its solvent-free formula makes it safe for the environment and user health, and it offers easy workability during application. Due to its conductive nature, the product prevents the accumulation of static electricity on the floor and provides added safety in environments with a risk of explosion.
Areas of application:
Bu iletken epoksi astar, endüstriyel zeminlerde, üretim ve depo alanlarında kullanıma uygundur. Özellikle hassas elektrik ve elektronik cihazların bulunduğu alanlarda, antistatik zemin kaplamalarının kondüktif temel katı olarak görev yapar. Patlama riski taşıyan bölgelerde güvenli ve etkili bir çözüm sunar.
Key Features:
- Environmentally and user-friendly with solvent-free formula
- Prevents static electricity buildup with its conductive structure
- Safe to use in sensitive areas where electrical and electronic devices are located
- Suitable for industrial areas with explosion risk
- Ideal base coat for antistatic floor coating systems
|
Type |
TS EN 1504-2/ April 2008 Principle 5(PR): 5.1 Physical Resistance / Surface Improvement Coating Application C |
|
Colour |
Black |
|
Outlook |
Mat |
|
Solid Matter by Weight, % |
96 |
|
Density |
1,40 ± 2 gr/cm³ |
|
Waste |
0,150 – 0,200 kg / m2 |
|
Package |
19 kg A Component + 3,160 kg B Component: Total 22.160 kg |
|
Flash Point |
>25 °C |
|
Mixture Ratio |
6 / 1 |
|
Application Methods |
Brush, Roller, Trowell |
|
Mixture Life |
40 min / 25°C |
|
Shelf Life |
1 year |
|
Waiting Time Between Coats |
12 hours / 25°C |
|
Drying Time |
12 hours / 25°C |
|
Mechanical Strength |
7 days |
|
Equipment Cleaning |
Epoxy Thinner |
SURFACE PREPARATION
Free particles and paint residues on the surface must be thoroughly cleaned, brokens and cracks must be repaired, surfaces should be roughened mechanically (blastrack or milling router) and cleaned from vacuum with vacuum cleaner. After priming with SC 215 Multipurpose Epoxy Primer, Conductive copper tapes are glued on the surface intercoat applied and on the surface, SC 325 Epoxy conductive primer must be polished with roller by stripping with plain trowel maximum of 0,150 kg – 0,200 kg per square meter.
MIXING PREPARATION
A and B component should be mixed with a low speed mixer for at least 3-4 minutes until a homogenous mixture is obtained by paying attention to mixture ratios. It is ready for application after mixing.
APPLICATION CONDITIONS
* Surface should have sufficient strength. The concrete should have a compressive strength of at least 25 N/mm² and a tensile strength of at least 1,5 N/mm².
* The SC 325 Epoxy Based Conductive Primer should be completed its curing before the top coat coating is started.
* Avoid application in very humid environments and below 10°C.
* Mixing ratios should be considered.
Products that can be used under this product:
* SC 200-K Condensed Intercoat Prime
* SC 210 Multipurpose Epoxy Primer
* SC 215 Solvent Free Multipurpose Epoxy Primer Products that can be used upper this product:
* SC 470 Antistatic Epoxy Coating
