BRV SC-200 K • Self-Leveling Epoxy Intermediate Layer
Two-Component, Ready-to-Use Epoxy Self-Leveling Intermediate Coat
Product Description:
This two-component epoxy self-leveling intermediate layer is designed to provide high performance and durability in industrial floors. Its ready-to-use formula makes application easy and spreads evenly across the surface. Its self-leveling structure eliminates irregularities on the floor surface, creating a smooth intermediate layer. By providing both thickness and mechanical strength between epoxy and polyurethane coatings, it creates long-lasting and durable floors.
Areas of application:
This product is suitable for use on factory and warehouse floors, work areas, loading zones, and industrial floors subjected to medium to heavy loads. In epoxy and polyurethane coating systems, it acts as a strong intermediate layer between the primer and the topcoat, enhancing floor performance. By ensuring even distribution on the floor surface, it optimizes both durability and aesthetic appearance.
Key Features:
- Ready to use and easy to apply
- Creates a smooth surface with self-leveling
- Provides mechanical strength between epoxy and polyurethane coatings
- Ideal for industrial floors subjected to medium and heavy loads
- Creates long-lasting and durable floors
|
Type |
TS EN 1504-2/April 2008 Principle 5(PR): 5.1 Physical Resistance / Surface Improvement Coating Application C |
|
Colour |
RAL |
|
Outlook |
Bright |
|
Solid Matter by Weight, % |
96 |
|
Density |
1,55 g/cm³ |
|
Waste |
0,300 – 0,800 kg / m2 |
|
Package |
24 kg A Component + 4 kg B Component : Total 28 kg |
|
Flash Point |
>25 °C |
|
Mixture Ratio |
6 / 1 |
|
Application Methods |
Brush, Roller, Trowell |
|
Mixture Life |
40 minutes / 25 °C |
|
Shelf Life |
1 year |
|
Waiting Time Between Coats |
12 hours / 25 °C |
|
Drying Time |
12 hours/ 25 °C |
|
Mechanical Strength |
7 days |
|
Equipment Cleaning |
Epoxy Thinner |
SURFACE PREPARATION
Free particles and paint residues on the surface must be completely removed, cracks and breaks must be repaired, surfaces must be mechanically roughened (by blasting or milling) and dust removed with a vacuum cleaner. Application should begin after priming with SC 210 Multi-Purpose Epoxy Primer or SC 270 Low Viscosity Impregnation Primer.
MIXING PREPARATION
Components A and B should be mixed using a low-speed mixer for at least 3-4 minutes until a homogeneous mixture is obtained, paying attention to the mixing ratios. After mixing, it is ready for application.
COATING SYSTEM
Primer consumption varies between 0.300-0.800 kg/m² depending on the absorption capacity of the surface.
APPLICATION CONDITIONS
* Surfaces must have sufficient strength. The compressive strength of the concrete must be at least 25 N/mm², and the tensile strength must be at least 1.5 N/mm². * Before applying the top coat, the SC 200 K Self-Leveling intermediate coat must be fully cured.
* Avoid application below 10°C and in very humid environments.
* Pay attention to the mixing ratios.
Products recommended for use on this product:
* SC 650 ST Solvent-Free Epoxy Resin-Based Top Coat
* SC 605 Epoxy Top Coat Paint for Vertical Surfaces
* SC 645 Orange Peel Patterned Top Coat Epoxy Coat
* SC 800 Hygienic Epoxy Top Coat and Paint for Drinking Water Tanks
* SC 902 Solvent-Free Epoxy Top Coat
* SC 905 Chemical Resistant Solvent-Free Epoxy Paint for Vertical Surfaces
* SC 950 Chemical Resistant Solvent-Free Epoxy Coat
SAFETY
This product is for professional use only. Before use, pay attention to the safety warnings on the packaging; if necessary, refer to the product’s Material Safety Data Sheet. Do not inhale, avoid contact with skin and eyes, do not swallow, use appropriate occupational safety equipment. Take necessary precautions to prevent fire and explosion hazards, as well as environmental pollution. Apply in well-ventilated areas.
TRANSPORT AND STORAGE
* The product should be stored between 5-35°C.
* The product should not be exposed to direct sunlight.
* Once opened, the product should be stored in its original packaging with the lid tightly closed.
NOTE
BRV reserves the right to make improvements/revisions to the product and this technical document over time. This Technical Data Sheet supersedes any previously published Technical Data Sheet for this product and is valid for 5 years. The user must ensure that the technical document in their possession is the most current version; if necessary, contact our company to verify the document’s currency. It is the applicator’s responsibility to ensure that the product is used for its intended purpose and that the application conditions and methods are valid. BRV Epoxy Paint does not accept any warranty claims for damages or losses arising from the failure to apply the products as recommended, work accidents, or direct or indirect damages. The packaging values stated above are nominal values in standardized formulas by BRV. Under normal production conditions, deviations to the extent foreseen in international standards may occur.
