WALL WG 034 • Water-based epoxy floor and wall finish paint.
Two-Component Water-Based Epoxy Paint
Public Works Item No: 04.50641
Product Description:
This two-component, water-based epoxy paint is a professional solution providing superior durability and longevity. With its high adhesion and mechanical strength, it forms an effective coating on concrete, wood, and metal surfaces. Its water-based formula makes it environmentally friendly and safe for user health. Its non-drip properties on vertical surfaces, ease of application, and fast drying time save time on projects.
Areas of application:
This epoxy paint offers a wide range of uses in industrial and commercial settings. It can be safely used on both walls and floors in high-traffic areas such as factories, food production facilities, shops, parking lots, and hospitals. Its high abrasion resistance and mechanical strength ensure long-lasting performance. Furthermore, its hygienic and easy-to-clean properties make it ideal for the food and healthcare sectors.
Key Features:
- Does not drip on vertical surfaces, easy to apply
- High mechanical strength and abrasion resistance
- Strong adhesion to concrete, wood and metal surfaces
- Easy to clean and hygienic
- Environmentally friendly with its water-based formula
|
Type |
TS EN 1504-2/Nisan 2008 Principle 5(PR): 5.1 Physical Resistance / Surface Improvement coating Application C |
|
Color |
RAL colors |
|
Appearance |
Semi-dull |
|
Thinner |
Su |
|
Solid Matter By Weight, % |
64 |
|
Density |
1,35 g/cm³ |
|
Waste |
0,200-0,500 kg / m2 |
|
Package |
18,0 kg A Component+ 3,0 kg B Component Total 21 kg |
|
Flash Point |
>25 °C |
|
Mixing Ratio |
6 / 1 |
|
Application Methods |
Brush, Roller, Airless Gun |
|
Mixture Life |
45 mins. / 25°C |
|
Shelf Life |
1 year |
|
Waiting Time Between Coating |
1 hour/ 25°C |
|
Drying Time |
1 hour / 25°C |
|
Mechanical Strength |
7 days |
|
Equipment Cleaning |
Water |
SURFACE PREPARATION
* Surfaces to be coated must be free of oil, dust, and dirt.
* Loose particles on the surface must be removed. Cement slurry and particles that prevent adhesion on concrete surfaces must be removed.
MIXING PREPARATION
Components A and B should be mixed using a low-speed mixer for at least 3-4 minutes, paying attention to the mixing ratios, until a homogeneous mixture is obtained. The mixture is ready for application after mixing.
APPLICATION
It can be applied by brush, roller, or spray. For spray application, water is used for thinning and the mixture is thinned to viscosity of 18-20 seconds /DIN CUP4/ at 20°C. It can be applied with a spray gun to give a dry film of 35-40 microns. For brush or roller application, the prepared mixture is applied without thinning.
APPLICATION CONDITIONS
* Surfaces must have sufficient strength. In situations requiring high strength, the compressive strength of the concrete should be at least 25 N/mm², and the tensile strength at least 1.5 N/mm².
* Before applying the second coat, the WG 034 water-based hygienic epoxy floor and wall topcoat must have completed its curing.
* Avoid application below 10°C and in very humid environments.
* Pay attention to the mixing ratios.
Recommended products to use under this product:
* WG 032 Water-Based Epoxy Primer
SAFETY
This product is for professional use only. Before use, pay attention to the safety warnings on the packaging; if necessary, refer to the product’s Material Safety Data Sheet. Do not inhale, avoid contact with skin and eyes, do not swallow, use appropriate occupational safety equipment. Take necessary precautions to prevent fire and explosion hazards, as well as environmental pollution. Apply in well-ventilated areas.
TRANSPORT AND STORAGE
* The product should be stored between 5-35°C.
* The product should not be exposed to direct sunlight.
* Once opened, the product should be stored in its original packaging with the lid tightly closed.
NOTE
BRV reserves the right to make improvements/revisions to the product and this technical document over time. This Technical Data Sheet supersedes any previously published Technical Data Sheet for this product and is valid for 5 years. The user must ensure that the technical document in their possession is the most current version; if necessary, the validity of the document should be verified by contacting our company. It is the responsibility of the applicator to ensure that the product is used as intended and that the application conditions and methods are valid. BRV Epoxy Paint does not accept any warranty claims for consequences arising from improper application of the products, work accidents, direct or indirect damages, or losses. The packaging values stated above are nominal values in standardized formulas by BRV. Under normal production conditions, deviations from the limits stipulated in international standards may occur.
